Garmin TREAD Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla GPS Garmin TREAD. Garmin TREAD 38 stron.
Również dla Garmin TREAD: Instrukcja instalacji (14 strony)
Drukuj stronę
Broadcasting a Location
While driving, do not interact with the display to broadcast your
location. If you do so, you could become distracted by the
display, which could lead to an accident causing serious
personal injury or death.
You can broadcast a location to the members in your active
group ride that are in range of the VHF radio.
1
From the main menu, select Group Ride.
2
If necessary, select
.
3
Select Broadcast to Group > Broadcast a Location and
select a location.
4
Select Share.
Viewing a Group Ride Notification
Do not read or reply to any notifications while driving. If you do
so, you could become distracted by the display, which could
lead to an accident causing serious personal injury or death.
From most pages, a notification appears when the device
receives a broadcasted group ride location or message. You can
also view group ride notifications in the Group Ride app.
NOTE: when you are viewing the map, new notifications appear
in a map tool at the edge of the screen..
1
From the main menu, select Group Ride >
notification.
2
Select Go! to navigate to a shared location.
Exiting a Group Ride
1
From the main menu, select Group Ride.
2
If necessary, select
.
3
Select Exit > Yes.
Group Ride Settings
From the main menu, select Group Ride >
Edit Rider Name: allows you to set your name that displays
during a group ride. This setting is not available during an
active group ride.
Rider Map Labels: sets the label to be displayed on each active
rider on the map.
Show Tracks on Map: shows the track that each group ride
member takes on the map.
Auto Zoom to Group: enables the map to automatically zoom
to the active group ride.
Reset Default Settings: allows you to reset all group ride
settings to default values. This setting is not available during
an active group ride.
Radio
NOTE: this feature is not available on all product models.
You can use the radio app to create radio presets, select a radio
channel and select squelch codes. To use this feature, you must
connect the device and the antenna to the Group Ride mount.
The Tread device configures radio settings automatically when
you join or create a group ride.
Selecting a Preset
NOTE: for some product models, the Radio app is located in the
apps menu.
1
From the main menu, select Radio.
2
Select an option:
• To move through available presets, select
6
WARNING
WARNING
and select a
.
or
• To select a preset from the menu, select Preset.
Selecting a Radio Channel
1
From the main menu, select Radio.
2
Select an option:
• To move to a different channel, select
• To select a MURS channel from the menu, select
Channel.
Adjusting the Squelch
You can adjust the squelch and change between CTCSS, DCS
and Open squelch modes to improve audio quality and avoid
radio interference in your area.
1
From the main menu, select Radio.
2
Select an option:
• To choose a squelch code within the current mode, select
or
.
• To adjust the squelch mode, select Open.
Adding a Custom Radio Preset
1
Select Radio > Preset >
2
Select
or
3
Select Save.
Selecting a Roger Tone
You can select the tone other devices play when you operate
your radio.
1
Select Radio >
2
Select a roger tone.
The device plays the selected tone.
3
Select Save.
Turning the Radio Off
Select Radio >
Enabling Push-to-Talk with a Headset
You can enable push-to-talk controls for use with a compatible
Bluetooth headset. This allows you to transmit your voice using
the voice dial feature on your headset.
1
Select Radio >
2
If necessary, follow the on-screen instructions to pair your
headset with the device.
3
Select Push to Talk Over Headset.
4
Select
.
Transmitting Your Voice
Before you can transmit your voice, you must pair your Tread
device with a compatible Bluetooth headset or connect the fist
microphone.
You can transmit your voice over the radio using the connected
fist microphone or a compatible Bluetooth headset.
NOTE: for some product models, the Radio app is located in the
apps menu.
Select an option:
• Hold the push-to-talk button on the side of the connected
fist microphone
page
3).
• From the main menu, select Radio > Push to Talk .
• Use the voice dial feature on your connected Bluetooth
headset
TIP: you can press the pause or stop button to manually
close the radio.
NOTE: you must enable the Push to Talk Over Headset
setting to use this feature
.
.
to select a channel and squelch code.
> Roger Tone.
> Yes.
> Push to Talk Over Headset.
(Installing the Fist Microphone and Mount,
(Enabling Push-to-Talk with a Headset, page
(Radio Settings, page
Off-Road Navigation Features
or
.
6).
7).