Garmin ZUMO Zumo 400 Arkusz instalacyjny - Strona 2
Przeglądaj online lub pobierz pdf Arkusz instalacyjny dla GPS Garmin ZUMO Zumo 400. Garmin ZUMO Zumo 400 2 stron. Personal motorcycle navigator
Również dla Garmin ZUMO Zumo 400: Skrócona instrukcja obsługi (2 strony), Instrukcja instalacji (46 strony)
Drukuj stronę
3: Attach the Base Plate to
the zūmo Mount
1. Thread the M4 x 40 mm flathead bolts
and nuts to attach the base plate to the
zūmo mount.
2. Tighten the nuts to secure the base plate.
4: Attach the Base Plate to
the Handlebar
Base
1. Align the ball of the
handlebar base and the
ball of the base plate with
the double-socket arm.
2. Tighten the knob slightly.
3. Adjust for better viewing
and operation.
4. Tighten the knob to
secure the mount.
5: Install the zūmo
in the Mount
1. Plug the power cable into
the zūmo mount. For a better
seal, tighten the screws on
the power connector.
2. Flip the lever up.
3. Flip the weather cap down
and under (magnetic).
4. Place the zūmo into the
mount, and flip the lever
down.
5. Tighten the security screw.
About the Security
Screwdriver
Use the security screw to better
secure the zūmo to the mount.
You can connect the screwdriver
to your key chain for easy access.
Security screwdriver
To remove the zūmo from the mount:
1. Loosen the security screw.
2. Flip up the lever on the mount.
3. Lift out the zūmo.
tiP: When your zūmo is not in the mount, use the
weather cap to prevent damage to the connector.
Weather cap
zūmo mount
Power socket
Weather cap
zūmo mount
Base plate
Mini-USB
port
Handlebar base
Security screw
Power
cable
More
Information
For more information about the
zūmo, refer to the zūmo 400/450
Owner's Manual on disk.
See the Important Safety and
Product Information guide for
product warnings and legal
information.
zūmo mount
Base plate
Double-socket arm
Knob
Lever