Garmin Approach S2 Pierwsze kroki - Strona 2

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Oglądaj Garmin Approach S2. Garmin Approach S2 4 stron. Gps watch
Również dla Garmin Approach S2: Instrukcja obsługi (6 strony), Podręcznik (20 strony)

Drukuj stronę
Garmin Approach S2 Pierwsze kroki
2
Select Measure Shot.
3
Walk to your ball.
The distance automatically resets when you move to the next
hole.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and
5 holes.
From the hole view
(Hole
Layup
and distance to reach the layup
screen.
NOTE: Distances are removed from the list as you pass
them.

Keeping Score

Before you can begin keeping score, you must start a round
(Playing
Golf).
1
From the hole view
(Hole
2
Select Start Scoring.
3
Select
or
to set the score.
Your total score
is updated.
4
Select OK to return to the hole view.
Reviewing Scores
You can edit individual scores but not the total score.
1
Hold
.
2
Select Scorecard.
3
Select
or
to select the hole.
4
Select OK to edit.
Viewing Scorecards on a Computer
You can view all saved scorecards on your computer.
1
Connect the device to a USB port on your computer using
the charging cradle.
2
The device appears as a removable drive in My Computer on
Windows
computers, and as a mounted volume on Mac
®
computers.
3
Open ScorecardViewer.html to view your scorecards.
Using the Odometer
You can use the odometer to record the time and distance
traveled. The odometer automatically starts and stops when you
start or end a round, and you can also start and stop it
manually.
1
Hold
.
2
Select Odometer to view or start the odometer.
3
Select an option:
• Select
> Continue to keep using the odometer.
2
View), select
.
appear on the
View), hold
.
• Select
> Turn Off to stop the odometer.
• Select
> Reset to reset the time and distance.

Customizing Your Device

Settings
Hold
, and select Setup.
Time: Sets the time to automatic or manual
Manually).
Format: Sets the time format to 12- or 24-hour.
Tones: Turns audible tones on or off.
Language: Sets the language.
Units: Sets to measure distance in yards or meters.
Setting the Time Manually
By default, the time is set automatically when the device
acquires satellite signals.
1
Hold
.
2
Select Setup > Time > Manual.
3
Select
or
to set the hour and minute.
4
Select AM or PM.
Setting the Alarm
1
Hold
.
2
Select Alarm > Set.
3
Select
or
to set the hour and minute.
4
Select AM or PM.
5
Verify the alarm is set to On.

Viewing Device Information

You can view the software version and unit ID.
1
Hold
.
2
Select About.
Appendix
Device Care
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that
can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
®
damage.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
(Setting the Time
NOTICE