Garmin D2 Bravo Instrukcja obsługi - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin D2 Bravo. Garmin D2 Bravo 36 stron.
Również dla Garmin D2 Bravo: Instrukcja obsługi (28 strony)
Drukuj stronę
2
Select Settings > Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Alerts.
5
Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
6
If necessary, select the type of alert.
7
Select a zone, enter the minimum and maximum values, or
enter a custom value for the alert.
8
If necessary, turn on the alert.
For event and recurring alerts, a message appears each time
you reach the alert value. For range alerts, a message appears
each time you exceed or drop below the specified range
(minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1
Hold UP.
2
Select Settings > Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Auto Lap.
5
Select an option:
• Select Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that displays
the time for that lap. The device also beeps or vibrates if audible
tones are turned on
(System Settings, page
If necessary, you can customize the data pages to display
additional lap data
(Customizing the Data Screens, page
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.
1
Hold UP.
2
Select Settings > Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Auto Lap > Lap Alert.
5
Select a data field to change it.
6
Select Preview (optional).
Enabling Auto Pause
®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is helpful if
your activity includes stop lights or other places where you must
stop.
NOTE: History is not recorded while the timer is stopped or
paused.
1
Hold UP.
2
Select Settings > Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Auto Pause.
5
Select an option:
20
• To pause the timer automatically when you stop moving,
• To pause the timer automatically when your pace or
Enabling Auto Climb
You can use the auto climb feature to detect elevation changes
automatically. You can use it during activities such as climbing,
hiking, running, or biking.
1
Hold UP.
2
Select Settings > Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Auto Climb > Status > On.
5
Select Run Screen to identify which data screen appears
while running.
6
Select Climb Screen to identify which data screen appears
while climbing.
7
If necessary, select Invert Colors to reverse the display
colors when changing modes.
8
Select Vertical Speed to set the rate of ascent over time.
9
Select Mode Switch to set how quickly the device changes
modes.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, climbing, navigating, hiking, running, or biking.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
1
Hold UP.
2
Select Settings > Apps.
3
Select an activity.
22).
NOTE: This feature is not available for all activities.
4
Select Auto Scroll.
19).
5
Select a display speed.
UltraTrac
The UltraTrac feature is a GPS setting that records track points
and sensor data less frequently. Enabling the UltraTrac feature
increases battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature for activities that
demand longer battery life and for which frequent sensor data
updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start. Hold UP, select Settings > Apps, and select an activity.
Select Timeout to adjust the timeout settings for the activity.
Normal: Sets the device to enter low-power watch mode after 5
minutes of inactivity.
Extended: Sets the device to enter low-power watch mode after
25 minutes of inactivity. The extended mode can result in
shorter battery life between charges.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap or a rest
during an activity using LAP. You can turn off the Lap Key
setting to avoid recording laps due to accidental key presses
during an activity.
1
Hold UP.
2
Select Settings > Apps.
select When Stopped.
speed drops below a specified level, select Custom.
Customizing Your Device