Garmin Fenix 5x Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin Fenix 5x. Garmin Fenix 5x 49 stron.
Drukuj stronę
profile setup
(Setting Up Your User Profile, page 18)
and set your maximum heart rate
Rate Zones, page 18)
.
Your device uses the VO2 max. estimate
Max. Estimates, page 15)
to provide a target race time based on your current
state of fitness. This projection also presumes you have
completed the proper training for the race.
NOTE: The projections may seem inaccurate at first. The
device requires a few runs to learn about your running
performance.
1 Select UP or DOWN to view the performance widget.
2 Select
to scroll through the performance
measurements.
Your projected race times appear for 5K, 10K, half
marathon, and marathon distances.
Heart Rate Variability and Stress Level
Stress level is the result of a three-minute test
performed while standing still, where the fēnix device
analyzes heart rate variability to determine your overall
stress. Training, sleep, nutrition, and general life stress
all impact how a runner performs. The stress level
range is from 1 to 100, where 1 is a very low stress state
and 100 is a very high stress state. Knowing your stress
level can help you decide if your body is ready for a
tough training run or yoga.
Viewing Your Heart Rate Variability and Stress
Level
This feature requires a Garmin chest heart rate monitor.
Before you can view your heart rate variability (HRV)
stress level, you must put on a heart rate monitor and
pair it with your device
37)
. If your fēnix 5X device was packaged with a
heart rate monitor, the devices are already paired.
TIP: Garmin recommends that you measure your stress
level at approximately the same time and under the
same conditions every day.
1 If necessary, select
stress app to the apps list.
2 Select Yes to add the app to your list of favorites.
3 From the watch face, select
4 Stand still, and rest for 3 minutes.
Performance Condition
As you complete your activity, such as running or
cycling, the performance condition feature analyzes
your pace, heart rate, and heart rate variability to
make a real-time assessment of your ability to perform
compared to your average fitness level. Performance
condition values range from -20 to +20. After the first 6
to 20 minutes of your activity, the device displays your
performance condition score. For example, a score of
+5 means that you are rested, fresh, and capable of a
good run or ride.
You can add performance condition as a data field to
16
(Setting Your Heart
(About VO2
and published data sources
(Pairing ANT+ Sensors, page
> Add > HRV Stress to add the
> HRV Stress >
,
one of your training screens to monitor your ability
throughout the activity. Performance condition can also
be an indicator of fatigue level, especially at the end of
a long training run or ride.
NOTE: The device requires a few runs or rides with
a heart rate monitor to get an accurate VO2 max.
estimate and learn about your running or riding ability
(About VO2 Max. Estimates, page 15)
Viewing Your Performance Condition
This feature requires wrist-based heart rate or a
compatible chest heart rate monitor. If you are using a
chest heart rate monitor, you must put it on and pair
it with your device
If your fēnix 5X device was packaged with a heart rate
monitor, the devices are already paired.
Your device analyzes your performance condition based
on heart rate and power data.
1 Add Perform. Cond. to a data screen
the Data Screens, page 31)
2 Go for a run or ride.
After 6 to 20 minutes, your performance condition
appears.
3 Scroll to the data screen to view your performance
condition throughout the run or ride.
Getting Your FTP Estimate
Before you can get your functional threshold power
(FTP) estimate, you must pair a chest heart rate monitor
and power meter with your device
Sensors, page 37)
estimate for cycling
for Cycling, page 15)
The device uses your user profile information from the
initial setup and your VO2 max. estimate to estimate
your FTP.
1 Select UP or DOWN to view the performance widget.
2 Select
to scroll through the performance
measurements.
Your FTP estimate appears as a value measured in
watts per kilogram, your power output in watts, and
a position on the color gauge.
.
Purple
Blue
Green
Orange
Red
For more information, see the appendix
page 46)
.
NOTE: When a performance notification alerts you
to a new FTP, you can select Accept to save the new
FTP, or Decline to keep your current FTP
Performance Notifications, page 14)
.
(Pairing ANT+ Sensors, page 37)
(Customizing
.
(Pairing ANT+
, and you must get your VO2 max.
(Getting Your VO2 Max. Estimate
.
Superior
Excellent
Good
Fair
Poor
.
.
(FTP Ratings,
(Turning On
FĒNIX
5X
®