Garmin Fenix 5x Instrukcja obsługi - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin Fenix 5x. Garmin Fenix 5x 49 stron.
Drukuj stronę
3 Enter the time.
4 If necessary, select Restart > On to automatically
restart the timer after it expires.
5 If necessary, select Sounds, and select a type of
notification.
6 Select Start Timer.
Using the Stopwatch
1 From the watch face, hold MENU.
2 Select Clock > Stopwatch.
3 Select
to start the timer.
4 Select DOWN to restart the lap timer
The total stopwatch time
5 Select
to stop both timers.
6 Select DOWN to reset both timers.
Setting Sunrise and Sunset Alerts
You can set the sunrise and sunset alerts to sound a
specific number of minutes or hours before the actual
sunrise or sunset occurs.
1 From the watch face, hold MENU.
2 Select Clock > Alerts.
3 Select an option:
• Select Til Sunset > Status > On.
• Select Til Sunrise > Status > On.
4 Select Time, and enter the time.
Syncing the Time with GPS
Each time you turn on the device and acquire satellites,
the device automatically detects your time zones and
the current time of day. You can also manually sync the
time with GPS when you change time zones, and to
update for daylight saving time.
1 From the watch face, hold MENU.
2 Select Clock > Sync With GPS.
3 Wait while the device locates satellites
Satellite Signals, page 40)
Use Hot key to Syncing the Time with GPS
1 Press START and DOWN simultaneously.
2 Wait while the device locates satellites
Satellite Signals, page 40)
FĒNIX
5X
®
.
1
continues running.
2
(Acquiring
.
(Acquiring
.
Navigation
Saving Your Location
You can save your current location to navigate back to
it later.
1 Hold LIGHT.
2 Select .
3 Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name,
elevation, and position information.
1 From the watch face, select
Locations.
2 Select a saved location.
3 Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
From the watch face, select
Locations > Delete All.
Projecting a Waypoint
You can create a new location by projecting the
distance and bearing from your current location to a
new location.
1 If necessary, select
project waypoint app to the apps list.
2 Select Yes to add the app to your list of favorites.
3 From the watch face, select
4 Select UP or DOWN to set the heading.
5 Select
.
6 Select DOWN to select a unit of measure.
7 Select UP to enter the distance.
8 Select
to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or
follow a course.
1 From the watch face, select
2 Select a category.
3 Respond to the on-screen prompts to choose a
destination.
4 Select Go To.
Navigation information appears.
5 Select
to begin navigation.
Navigating to a Point of Interest
If the map data installed on your device includes points
of interest, you can navigate to them.
1 From the watch face, select
2 Select an activity.
> Navigate > Saved
> Navigate > Saved
> Add > Project Wpt. to add the
> Project Wpt..
> Navigate.
.
23