Garmin Fenix 5x Instrukcja obsługi - Strona 36
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin Fenix 5x. Garmin Fenix 5x 49 stron.
Drukuj stronę
Auto Cal.: Allows the altimeter to self-calibrate each
time you turn on GPS tracking.
Calibrate: Allows you to manually calibrate the
altimeter sensor.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and
the device uses automatic calibration at your GPS
starting point by default. You can manually calibrate
the barometric altimeter if you know the correct
elevation.
1 Hold MENU.
2 Select Settings > Sensors & Accessories > Altimeter.
3 Select an option:
• To calibrate automatically from your GPS starting
point, select Auto Cal. > On.
• To enter the current elevation, select Calibrate.
Barometer Settings
Hold MENU, and select Settings > Sensors &
Accessories > Barometer.
Plot: Sets the time scale for the chart in the barometer
widget.
Storm Alert: Sets the rate of barometric pressure
change that triggers a storm alert.
Watch Mode: Sets the sensor used in watch mode. The
Auto option uses both the altimeter and barometer
according to your movement. You can use the
Altimeter option when your activity involves changes
in altitude, or the Barometer option when your
activity does not involve changes in altitude.
Map Settings
You can customize how the map appears in the map
app and data screens.
Hold MENU, and select Settings > Map.
Orientation: Sets the orientation of the map. The North
Up option shows north at the top of the screen. The
Track Up option shows your current direction of
travel at the top of the screen.
User Locations: Shows or hides saved locations on the
map.
Auto Zoom: Automatically selects the zoom level for
optimal use of your map. When disabled, you must
zoom in or out manually.
Lock on Road: Locks the position icon, which represents
your position on the map, onto the nearest road.
Track Log: Shows or hides the track log, or the path you
have traveled, as a colored line on the map.
Track Color: Changes the track log color.
Detail: Sets the amount of detail shown on the map.
Showing more detail may cause the map to redraw
more slowly.
FĒNIX
5X
®
Showing and Hiding Map Data
If you have multiple maps installed on your device, you
can choose the map data to show on the map.
1 Hold MENU.
2 Select Settings > Map > Configure Maps.
3 Select a map to activate the toggle switch, which
shows or hides the map data.
GroupTrack Settings
Hold MENU, and select Settings > GroupTrack.
Show on Map: Enables you to view connections on the
map screen during a GroupTrack session.
Activity Types: Allows you to select which activity types
appear on the map screen during a GroupTrack
session.
Nvigation Settings
You can customize the map features and appearance
when navigating to a destination.
Customizing Map Features
1 Hold MENU.
2 Select Settings > Navigation > Data Screens.
3 Select an option:
• Select Map to turn on or off the map.
• Select Guide to turn on or off the guide screen
that displays the compass bearing or course to
follow while navigating.
• Select Elevation Plot to turn on or off the elevation
plot.
• Select a screen to add, remove, or customize.
Setting Up a Heading Bug
You can set up a heading indicator to display on your
data pages while navigating. The indicator points to
your target heading.
1 Hold MENU.
2 Select Settings > Navigation > Heading Bug.
Setting Navigation Alerts
You can set alerts to help you navigate to your
destination.
1 Hold MENU.
2 Select Settings > Navigation > Alerts.
3 Select an option:
• To set an alert for a specified distance from your
final destination, select Final Distance.
• To set an alert for the estimated time remaining
until you reach your final destination, select Final
ETE.
4 Select Status to turn on the alert.
5 Enter a distance or time value, and select
.
35