Garmin FENIX A03095 Podręcznik - Strona 29

Przeglądaj online lub pobierz pdf Podręcznik dla Oglądaj Garmin FENIX A03095. Garmin FENIX A03095 38 stron.

Drukuj stronę
Garmin FENIX A03095 Podręcznik

Device Maintenance

Device Care

Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Avoid pressing the keys under water.
Keep the leather band dry. Avoid swimming or showering with
the leather band. Exposure to water can damage the leather
band.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.

Cleaning the Device

Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.

Cleaning the Leather Bands

1
Wipe the leather bands with a dry cloth.
2
Use a leather conditioner to clean the leather bands.
Device Maintenance
NOTICE
NOTICE

Replacing the Heart Rate Monitor Battery

1
Remove the sleeve
from the heart rate monitor module.
2
Use a small Phillips (00) screwdriver to remove the four
screws on the front of the module.
3
Remove the cover and battery.
4
Wait 30 seconds.
5
Insert the new battery under the two plastic tabs
positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
The O-ring gasket should remain around the outside of the
raised plastic ring.
6
Replace the front cover and the four screws.
Observe the orientation of the front cover. The raised screw
should fit in the matching raised screw hole on the front
cover.
NOTE: Do not overtighten.
7
Replace the sleeve.
After you replace the heart rate monitor battery, you may need
to pair it with the device again.

Troubleshooting

My device is in the wrong language

You can change the device language selection if you have
accidently selected the wrong language on the device.
1
Hold MENU.
2
Scroll down to the last item in the list, and select
3
Scroll down to the second to last item in the list, and select
.
4
Select
.
5
Select your language.
Is my smartphone compatible with my
device?
The fēnix device is compatible with smartphones using
Bluetooth Smart wireless technology.
Go to
www.garmin.com/ble

My phone will not connect to the device

• Enable Bluetooth wireless technology on your smartphone.
• Bring your phone within 10 m (33 ft.) of the device.
• On your smartphone, open the Garmin Connect Mobile app,
and enter pairing mode.
• On your device, hold LIGHT, and select to turn on
Bluetooth technology and enter pairing mode.
with the
.
for compatibility information.
25