Garmin Instinct 2 Solar Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin Instinct 2 Solar. Garmin Instinct 2 Solar 30 stron.
Również dla Garmin Instinct 2 Solar: Skrócona instrukcja obsługi (16 strony)
Drukuj stronę
performance in challenging environments and faster position
acquisition. Using the GPS and another satellite together can
reduce battery life more than using the GPS option only.
Using the UltraTrac option records track points and sensor
data less frequently
(UltraTrac, page
Lap Key: Enables you to record a lap, set, or a rest during the
activity
(Turning On and Off the Lap Key, page
Metronome: Plays tones at a steady rhythm to help you
improve your performance by training at a faster, slower, or
more consistent cadence
Pool Size: Sets the pool length for pool swimming.
Power Save Timeout: Sets the power-save timeout options for
the activity
(Power Save Timeout Settings, page
Rename: Sets the activity name.
Restore Defaults: Allows you to reset the activity settings.
Stroke Detect.: Enables stroke detection for pool swimming.
Customizing the Data Screens
You can show, hide, and change the layout and content of data
screens for each activity.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select the activity to customize.
4
Select the activity settings.
5
Select Data Screens.
6
Select a data screen to customize.
7
Select an option:
• Select Layout to adjust the number of data fields on the
data screen.
• Select a field to change the data that appears in the field.
• Select Reorder to change the location of the data screen
in the loop.
• Select Remove to remove the data screen from the loop.
8
If necessary, select Add to add a data screen to the loop.
You can add a custom data screen, or select one of the
predefined data screens.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select the activity to customize.
4
Select the activity settings.
5
Select Data Screens > Add > Map.
Alerts
You can set alerts for each activity, which can help you to train
toward specific goals, to increase your awareness of your
environment, and to navigate to your destination. Some alerts
are available only for specific activities. There are three types of
alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you once. The event is a
specific value. For example, you can set the device to alert
you when you reach a specified elevation.
Range alert: A range alert notifies you each time the device is
above or below a specified range of values. For example, you
can set the device to alert you when your heart rate is below
60 beats per minute (bpm) and over 210 bpm.
Recurring alert: A recurring alert notifies you each time the
device records a specified value or interval. For example, you
can set the device to alert you every 30 minutes.
Customizing Your Device
14).
14).
(Using the Metronome, page
14).
Alert Name Alert Type
Cadence
Range
Calories
Event,
recurring
Custom
Event,
recurring
Distance
Recurring
3).
Elevation
Range
Heart Rate Range
Pace
Range
Proximity
Event
Run/Walk
Recurring
Speed
Range
Stroke Rate Range
Time
Event,
recurring
Setting an Alert
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Alerts.
6
Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
7
If necessary, select the type of alert.
8
Select a zone, enter the minimum and maximum values, or
enter a custom value for the alert.
9
If necessary, turn on the alert.
For event and recurring alerts, a message appears each time
you reach the alert value. For range alerts, a message appears
each time you exceed or drop below the specified range
(minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap.
6
Select an option:
• Select Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance between
laps.
Description
You can set minimum and maximum
cadence values.
You can set the number of calories.
You can select an existing message or
create a custom message and select an
alert type.
You can set a distance interval.
You can set minimum and maximum
elevation values.
You can set minimum and maximum heart
rate values or select zone changes. See
About Heart Rate Zones, page 4
Heart Rate Zone Calculations, page
You can set minimum and maximum pace
values.
You can set a radius from a saved
location.
You can set timed walking breaks at
regular intervals.
You can set minimum and maximum
speed values.
You can set high or low strokes per
minute.
You can set a time interval.
and
5.
13