Garmin quatix 3 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin quatix 3. Garmin quatix 3 34 stron.
Drukuj stronę3
Select an option:
• To count down your remaining competition time, select
Set Timers.
• To track your daily fish count, select Start Fishing, and
select START to increase or BACK to decrease your fish
count.
Tides
Viewing the Tide Data
You can view up to seven days of tide data for your current
location. You can update your location by selecting START from
the tide screen.
1
START > Tides.
A 24-hour tide chart appears, showing the high tides
low tides
for the current date.
2
Select UP or DOWN to view the tide data from other days.
Anchor
Marking Your Location as a Waypoint
1
From the clock, select START.
2
Select Anchor.
3
Select an option:
• Select Drop Anchor to mark your location as a waypoint.
• Select Setup to adjust the anchor settings.
Anchor Settings
Select START > Anchor > Setup.
Scope: Calculates the scope to assist with anchoring.
Depth: Sets the depth of the water.
Bow Offset: Sets the distance between the bow of your boat
and the location of your GPS antenna.
Offset: Sets the difference between the depth of the keel and
the location of your transducer.
Set Alarm: Sets an alarm to alert you when the boat drifts a
specified distance from the anchor.
Update Interval: Sets the time interval for updating anchor
alarm data.
Boat Data
Streaming Boat Data
You can stream data fields from your compatible chartplotter.
The device displays up to three data fields per page, and up to
four pages of data.
1
From the clock, select START.
2
Select Boat Data.
Skiing
Going Cross-Country Skiing
Before you go skiing, you should charge the device
the Device, page
1).
1
From the clock, select START.
Activities
2
Select XC Ski.
3
Go outside, and wait while the device locates satellites.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
6
Select LAP to record laps (optional).
7
Select UP or DOWN to view additional data pages (optional).
8
After you complete your activity, select STOP > Save.
Going Downhill Skiing or Snowboarding
Before you go skiing or snowboarding, you should charge the
device
(Charging the Device, page
1
From the clock, select START.
and
2
Select Ski / Board.
3
Go outside, and wait while the device locates satellites.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
The auto run feature is turned on by default. This feature
automatically records new ski runs based on your movement.
The timer pauses when you stop moving downhill and when
you are on a chairlift. The timer remains paused during the
chairlift ride.
6
If necessary, start moving downhill to restart the timer.
7
Select UP or DOWN to view additional data pages (optional).
8
After you complete your activity, select STOP > Save.
Viewing Your Ski Runs
Your device records the details of each skiing or snowboarding
run. You can view run details from the paused screen or while
the timer is running.
1
Start a skiing or snowboarding activity.
2
Hold UP.
3
Select View Runs.
4
Select UP and DOWN to view details of your last run, your
current run, and your total runs.
The run screens include time, distance traveled, maximum
speed, average speed, and total descent.
Hiking
Going for a Hike
Before you go for a hike, you should charge the device
(Charging the Device, page
1
From the clock, select START.
2
Select Hike.
3
Go outside, and wait while the device locates satellites.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
The device records a track while you hike.
6
When you need to take a break or pause the device from
tracking, select STOP > Resume Later.
The device saves the status of your hike and enters low
power mode.
7
Select START > Hike > Resume to resume tracking.
8
Select UP or DOWN to view additional data pages (optional).
9
After you complete your activity, select STOP > Save.
(Charging
1).
1).
3