Garmin GPS 19x NMEA 0183 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System nawigacji samochodowej Garmin GPS 19x NMEA 0183. Garmin GPS 19x NMEA 0183 19 stron. Garmin gps receiver - car gps user manual
Również dla Garmin GPS 19x NMEA 0183: Instrukcja instalacji (8 strony), Instrukcja instalacji (48 strony), Instrukcja instalacji (6 strony), Instrukcja instalacji (6 strony)

Drukuj stronę
Garmin GPS 19x NMEA 0183 Instrukcja instalacji
GPS 24XD HVS NMEA
0183
®
INSTALLATION INSTRUCTIONS
Important Safety Information
CAUTION
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
For the best performance and to avoid damage to your boat, read all installation instructions before
proceeding. Install the device per these instructions. Use the appropriate fasteners, tools, and mounts listed,
which are available at most marine dealers.
The Garmin
GPS 24xd HVS (NMEA 0183) high-sensitivity GPS antenna provides position information over
®
NMEA 0183. The GPS 24xd can be connected to a Garmin chartplotter or another NMEA 0183 compliant
device.
For more information, go to garmin.com.
Tools Needed
• Drill
• 3.2 mm (1/8 in.) drill bit
• 19 mm (3/4 in.) drill bit for a pole-mount cable-hole
• 25 mm (1 in.) hole saw for a surface-mount cable-hole
• Countersink bit for mounting on fiberglass
• Screws for under-deck mounting
• Screwdriver, appropriate for the screw type
• Marine sealant (optional)
• Solder and shrink wrap for all wiring connections when limiting the antenna to 1 Hz
(Limiting the Antenna
Update Rate, page
14).
TA-2020/6796
June 2021
GUID-04C0F16F-F9A7-4EAC-96FC-C8DF7618E2D8 v3