Garmin GPSMAP 8600 series Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System nawigacji samochodowej Garmin GPSMAP 8600 series. Garmin GPSMAP 8600 series 9 stron.
Również dla Garmin GPSMAP 8600 series: Instrukcja instalacji (9 strony), Skrócona instrukcja obsługi (6 strony)
Drukuj stronę
Item
Garmin Wire
Function
TxA (+)
TxB (-)
• If the NMEA 0183 device has only one input (receive, Rx)
wire (no A, B, +, or -), you must leave the pink wire
unconnected.
• If the NMEA 0183 device has only one output (transmit, Tx)
wire (no A, B, +, or -), you must connect the orange/white
wire to ground.
NMEA 0183 Device Connected with a Single Receive Wire
In this example, the NMEA 0183 device is receiving data from
the chartplotter.
Item
Description
Power source
Power cable
NMEA 0183 device
NMEA 0183 cable
Item Garmin Wire
Function
Power
Power ground
Data ground
TxA (+)
TxB (-)
NMEA 0183 Device Connected with a Single Transmit Wire
In this example, the NMEA 0183 device is sending data to the
chartplotter.
Item
Description
Power source
Power cable
NMEA 0183 device
NMEA 0183 cable
Item Garmin Wire
Function
Power
Power ground
Data ground
RxB (-)
RxA (+)
Garmin Wire
NMEA 0183
Color
Device Wire
Function
Gray
Rx
Pink
N/A
Garmin Wire
NMEA 0183 Device
Color
Wire Function
Red
Power
Black
Power ground
Black
Data ground
Gray
RxA
Pink
N/A
Garmin Wire
NMEA 0183 Device
Color
Wire Function
Red
Power
Black
Power ground
Black
Data ground
Orange/white
N/A
White
TxA (+)
NMEA 0183 Pinout
Port
Wire Function
Input port 1
RX/A (+)
RX/B (-)
Input port 2
RX/A (+)
RX/B (-)
Input port 3
RX/A (+)
RX/B (-)
Input port 4
RX/A (+)
RX/B (-)
Output port 1 TX/A (+)
TX/B (-)
Output port 2 TX/A (+)
TX/B (-)
N/A
Garmin GPS in (unused)
N/A
Garmin GPS out (unused) Green
N/A
Alarm
N/A
Accessory on
N/A
Ground (shield)
N/A
Spare
N/A
Spare
Lamp or Horn Connections
The device can be used with a lamp, a horn, or both, to sound or
flash an alert when the chartplotter displays a message. This is
optional, and the alarm wire is not necessary for the device to
function normally. When connecting the device to a lamp or
horn, observe these considerations.
• The alarm circuit switches to a low-voltage state when the
alarm sounds.
• The maximum current is 100 mA, and a relay is needed to
limit the current from the chartplotter to 100 mA.
• To toggle visual and audible alerts manually, you can install
single-pole, single-throw switches.
Item Description
Power source
Power cable
Horn
Wire Color
Pin Number
White
Orange/white
Brown
Brown/white
Violet
Violet/white
Black/white
Red/white
Gray
Pink
Blue
Blue/white
White/Green
Yellow
Orange
Black
N/A
N/A
5