Brother 884-B02 Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna do szycia Brother 884-B02. Brother 884-B02 38 stron. Compact overlock machine

Piping foot

Features

By using the piping foot, you can obtain piping

at the edge of material. The piping is useful to

decorate on edge of wares (pajamas, sports ware),

cover for furniture, cushion, bag, etc.

Preparation

Attach the piping foot (see CHAPTER 1 "Attaching/

Removing presser foot").

Machine setting (type of stitch):

- 2 needle 4 thread overlock

- 1 needle 3 thread overlock (the right needle should

be removed)

How to adjust the machine

1. Set stitch length at 3mm. (standard position)

2. Set stitch width at 5 to 6mm

3. Adjust thread tension for ordinary overlock

stitching (refer to CHAPTER 5 "Stitch

Selection").

3mm

5 ~ 6mm

3mm

5 ~ 6mm

How to set fabric and piping tape

1 Surface 2 Reverse

1. Put piping tape between the 2 pcs of fabric and

adjust both edges of the fabric as illustrated.

Keep 3cm piping tape over the edge of fabric

for steady sewing. (The surface of fabric should

be inside.)

2. Place fabric with piping tape under presser foot

and put the piping tape into the groove <A> of

piping foot and start sewing.

Start sewing

1. Carefully guide the fabric and piping tape by

hands during sewing.

2. Turn both sides of the fabric after sewing.

NOTE:

For easy sewing, bast the both fabric and piping

tape before sewing.

Piping sewing is difﬁ cult at an acute angle.

In case of wide piping tape, you should sew it with

cutting the excess part.

3cm

<A>