Garmin NavComm SL30 Podręcznik użytkownika - Strona 23
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System nawigacji samochodowej Garmin NavComm SL30. Garmin NavComm SL30 48 stron. Vhf transceiver
Również dla Garmin NavComm SL30: Skrócona instrukcja obsługi (2 strony), Instalacja (2 strony)
Drukuj stronęSaving a Nav channel
You can save the frequency in the Standby position and
give it a name of up to four characters. Additional
information can be saved along with the name, if the
selection is a Localizer or ILS. ILS selections may include
the runway number (01-36) and designation (L, R, or C).
Up to 250 Comm and Nav frequencies may be saved.
After 250 Nav and Comm frequencies are saved, you will
get a "Database Full" message. You will have to remove
frequencies before any more can be saved.
1. While in Nav mode, press
display will show "store as" with a flashing cursor.
108.10 s111.10
SMALL
2. Turn the
LARGE
3. Turn the
position.
4. If it is a Localizer frequency, after you turn the
knob one position clockwise past the fourth character,
the LOC label will flash.
SMALL
5. Turn the
(01-36).
LARGE
6. Turn the
underscore will flash. Turn the
L, R, or C to identify the runway, as desired.
ENT
7. Press
button if you do not want to save the frequency.
Removing a Nav channel
You may only remove channels stored in the User list.
1. In Nav mode, press
LARGE
2. Turn the
SMALL
knob to the desired channel.
SEL
3. Press
. "Remove" will flash on the right side of the
display.
ENT
4. Press
You may also press
ENT
store as _
knob to choose the desired character.
knob to move to the next character
knob to choose the runway number
knob one position clockwise. An
after making your selections. Press the
SEL
.
knob to the User list. Turn the
to remove the channel from the User list.
SEL
again to cancel the process.
Advanced Operation
. The right side of the
ils
LARGE
SMALL
knob to choose
SEL
17