Garmin RV-IN1501 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System nawigacji samochodowej Garmin RV-IN1501. Garmin RV-IN1501 36 stron. Rv infotainment system
Również dla Garmin RV-IN1501: Instrukcje instalacji (4 strony)

Drukuj stronę

Select to adjust the volume or change speaker zones.

Speaker zone and volume level.

Selecting a Source

Select the source icon.

The source icon is in the lower-left corner of the stereo

screen, and shows the source that is currently selected.

Select a source.

Playback Controls

The on-screen playback controls may change depending on the

source selected.

Select to pause media playback.

Play

• Select to play media or resume media playback.

• Select to skip to the previous track, when using an

applicable source.

• Hold to rewind the track when using an applicable

source.

• AM, FM, or SiriusXM (in Live Mode) source:

◦ Select to tune to the previous station or preset.

◦ Hold for faster tuning (manual mode only).

• SiriusXM (in Replay Mode) source:

◦ Select to skip to the previous track.

◦ Hold to rewind the current track.

• Select to skip to the next track, when using an

applicable source.

• Hold to fast-forward the track when using an applicable

source.

• AM, FM, or SiriusXM (in Live Mode) source:

◦ Select to tune to the next station or preset.

◦ Hold for faster tuning (manual mode only).

• SiriusXM (in Replay Mode) source:

◦ Select to skip to the next track, if applicable.

◦ Hold to fast-forward the current track, if applicable.

Select to cycle through the tuning modes (auto or

manual) and presets.

Press and hold to save the current station as a preset.

Hold to switch between Replay Mode and Live Mode

(Using Replay Mode, page

(SiriusXM

source)

Replay Mode: press to pause and play the channel.

Live Mode: Select to cycle through the tuning modes

(manual or category) and presets.

Select to increase the volume for the current zone.

Select to decrease the volume for the current zone.

Gain

On the Aux source, move the slider left or right to

increase or decrease the gain.

Media Player Connection

Always disconnect your media player from the stereo when not

in use and do not leave it in your vehicle. This helps reduce the

risk of theft and damage from extreme temperatures.

Do not remove the media player or use your stereo in a

distracting manner while operating the vehicle. Check and obey

all laws in association with use.

The stereo accepts a variety of media players, including

smartphones and other mobile devices. You can connect a

compatible media player using a Bluetooth wireless connection

or a USB connection to the USB port. The stereo can play

media from Universal Plug and Play (UPnP) devices, such as a

Network Attached Storage (NAS) device connected to the same

network.

Media Playback

16).

CAUTION

USB Device Compatibility

You can use a USB flash drive or the USB cable included with

your media player to connect a media player or mobile device to

the USB port.

The stereo is compatible with Android devices that support MTP

mode.

The stereo is compatible with media players and other USB

mass storage devices, including USB flash drives. Music on

USB drives must meet these conditions:

• The USB mass storage device must be formatted using the

FAT32 or NTFS file system.

• The music files must be formatted as MP3, AAC (.m4a), or

FLAC, files.

• If you connect a portable hard drive, you must connect it to

an external power source. The USB port on this stereo

cannot provide power for a portable hard drive.

Playing Media from a USB Device

You can play media from a connected USB flash drive or

compatible portable media player.

Locate the media USB port in your vehicle.

Connect the USB device to the USB port.

Select an option:

• To play media from an Apple device, select Fusion Media

> iPod.

• To play media from another portable media player or USB

flash drive, select Fusion Media > USB.

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

Connect the auxiliary device to the Aux 1 connector on the

back of the stereo.

Select the Aux1 source.

Connecting to a Garmin Watch

For a list of a compatible Garmin watches, go to

www.fusionentertainment.com.

For more information about the watch, see the watch manual at

www.garmin.com/manuals.

Following the instructions in the watch manual, install the

FUSION-Link Lite

™

app from the Connect IQ

watch.

On the stereo, select the BT source.

Select

> DISCOVERABLE.

The stereo remains discoverable for two minutes.

Bring the watch within 3 m (10 ft.) of the stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT

while pairing.

Open the FUSION-Link Lite app on the watch.

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair to another stereo, in the FUSION-Link Lite app,

select Settings > Pair new.

Control the audio playback using the FUSION-Link Lite app

on the watch.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch.

™

store onto the

devices