Garmin RV-IN1501 Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla System nawigacji samochodowej Garmin RV-IN1501. Garmin RV-IN1501 4 stron. Rv infotainment system
Również dla Garmin RV-IN1501: Instrukcja obsługi (36 strony)
Drukuj stronę
RV-IN1501
RV INFOTAINMENT SYSTEM
INSTALLATION
INSTRUCTIONS
Important Safety Information
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Failure to follow these cautions could result in damage to the
vehicle or poor product performance.
This device must be installed according to these instructions.
Disconnect the vehicle's power supply before beginning to install
this product.
Before applying power to this product, make sure it has been
correctly grounded according to the installation instructions.
You must read all installation instructions before beginning the
installation. If you experience difficulty during the installation,
contact Garmin
Product Support.
®
Connector Identification
Item Label
Description
ZONE 1
Line out
LINE OUT
connectors for
zone 1
ZONE 2
Line out
LINE OUT
connectors for
zone 2
None
Wiring harness
connectors
None
AM/FM antenna
connector
SiriusXM
SiriusXM
USB (500 mA)
iPhone/iPod USB (1 A)
AUX 1
Auxiliary input 1
INPUT
2
WARNING
NOTICE
Connector Details
Left (white), right (red), and
subwoofer (orange)
RCA connectors
Left (white), right (red), and
subwoofer (orange)
RCA connectors
Connects to the included and
optional wiring harnesses
Connects to either the vehicle's
AM/FM antenna cable or an
inline adapter attached to the
vehicle's AM/FM antenna cable
®
port
Connects to a compatible
SiriusXM Connect vehicle tuner
and antenna (sold separately)
Reserved for manufacturer use
Compatible only with low-
current (<500 mA) USB devices
Interfaces with and charges
supported smartphones and
USB devices
Left (white) and right (red) RCA
connectors
Item Label
Description
CAMERA
Input for camera
AUDIO
audio or for
INPUT/AUX
auxiliary 2
2 INPUT
None
Ethernet port
CAN 1
CAN BUS 1
CAN 2
CAN BUS 2
MIC
Microphone input 3.5 mm mono microphone port
None
GPS antenna
VIDEO IN
Analog camera
video input
Wiring Harnesses
Power and Speaker Wiring Harness
The power and speaker wiring harness contains the main power
and speaker connections for the system. The harness connects
directly to the stereo
and to the vehicle wiring harness
without modification. You can use this diagram to troubleshoot
or to address non-default installation requirements.
Wire
Function
Color
Yellow
Power (+)
Red
Ignition power
Orange
Illumination
Black
Ground (-)
Blue
Amplifier on
Connector Details
Left (white) and right (red) RCA
connectors
Connects to a FUSION
PartyBus
™
network
Connects to RV control systems
using an adapter (sold
separately)
Reserved for vehicle
integration. Connects to the
chassis CAN system using an
adapter cable to support
steering wheel controls.
Connects to the included
microphone for hands-free
calling and voice input
Connects to the included GPS
antenna
4 RCA video connectors
Connects to up to four vehicle
cameras, including forward, left
mirror, right mirror, and backup
cameras.
Notes
Connects to the positive terminal of a
12 Vdc power source capable of
supplying 15 A.
Connects to a separately-switched,
12 Vdc connection, such as an ignition
bus, to turn the stereo on and off.
Connects to the vehicle's illumination
wire to dim the stereo screen when the
headlights are on. The gauge of the
illumination wire must be suitable for the
fuse supplying the circuit it is connected
to.
NOTE: This wire is not used for all
vehicles.
Connects to the negative terminal of a
12 Vdc power source capable of
supplying 15 A. You should connect this
wire before connecting the yellow wire.
All accessories connected to the stereo
must share a common ground location.
Connects to optional external amplifiers,
enabling them to turn on when the
stereo turns on.