Garmin VIEO RV 1052 Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System nawigacji samochodowej Garmin VIEO RV 1052. Garmin VIEO RV 1052 38 stron.

Drukuj stronę

• The music files must be formatted as MP3, AAC (.m4a), or

FLAC, files.

• If you connect a portable hard drive, you must connect it to

an external power source. The USB port on this stereo

cannot provide power for a portable hard drive.

• The USB mass storage device must be formatted using one

of the following systems:

◦ Microsoft

: NTFS

, VFAT, FAT

◦ Apple: HFS, HFSPLUS

◦ Linux: EXT2, EXT3, EX4

Playing Media from a USB Device

You can play media from a connected USB flash drive,

smartphone, or compatible portable media device.

Select an option:

• Locate the media USB port in your vehicle.

For more information, see your vehicle owner's manual.

• Locate the 2.1 A USB port on the back of the Vieo dock.

For more information, see the Vieo RV 850 / RV 1050

Series Installation Instructions.

Connect the USB device to the USB port.

Select

Select the source icon

(Music Player Overview, page

Select an option:

• To play media from an Apple device, select iPod.

• To play media from a smartphone or device with Android,

select MTP.

• To play media from another portable media player or USB

flash drive, select USB.

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

Connect the auxiliary device to the Aux 1 connector on the

back of the stereo.

Select the Aux1 source.

Connecting an Apple Device Using AirPlay

From the settings menu on your Apple device, connect to the

same wireless network as your compatible Fusion

NOTE: You can connect some Apple devices to the network

using a wired Ethernet connection, if applicable. Go to the

Apple website for more information.

On your Apple device, open the music app you want to

stream to the stereo.

From the music app or program, select

the name of the stereo.

If necessary, start playing music on the app.

The stereo changes to the AirPlay source automatically and

plays audio from your Apple device.

NOTE: On some AirPlay devices, adjusting the volume on

the device affects the volume level on the stereo.

Setting an AirPlay Password

You can set a password that a user must enter when connecting

to the stereo using the AirPlay feature.

Select

Enter a password.

NOTE: The AirPlay password is case-sensitive.

Software updates are not supported using NTFS file system.

FAT includes most types of FAT file systems except exFAT.

, MSDOS

, and select

> AirPlay PASSWORD.

When connecting to this stereo using the AirPlay feature, the

user must enter the password on their Apple device.

Connecting a UPnP Device

You must connect your stereo to a network to play media from a

UPnP device, such as a NAS device.

Connect your UPnP device to the same network as the

stereo, referring to the instructions provided with your UPnP

device and router if necessary.

Select the UPnP source on the stereo

page

13).

You can browse and play media from the UPnP device the

same way that you would from a USB flash drive

Music Playback on a Connected Android Device, USB Flash

Drive, or Media Player, page

Audio Control

Adjusting the Volume for a Zone

Select

Select a zone.

TIP: To control all zones at the same time, select GLOBAL.

Drag the slider up or down.

13).

Muting all Connected Stereos

You can quickly mute the audio from this stereo or from all

stereos connected to the network

Networking, page

From any source, select .

The mute symbol appears and audio from this stereo is

silenced.

Adjusting the Tones

Select

Select a zone.

Select TONE.

Use the slider bar to adjust the level of each tone.

Disabling the Loud Setting for a Zone

The LOUD setting maintains frequency response at low volumes

and increases perceived loudness at high volumes. This setting

is enabled by default in all zones.

Select

Select a zone.

stereo.

Select LOUD to clear the check box.

Adjusting the Gain for an Auxiliary Device

You can adjust the gain for a connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments.

Select an auxiliary source.

Move the slider left or right to increase or decrease the gain.

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Speaker Zones

You can group speakers in one area into a speaker zone. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

You can set the balance, volume limit, tone, subwoofer level,

subwoofer frequency, and name for each zone, and configure

other zone-specific settings

Adjusting the Audio Settings for a Zone

Select

(Selecting a Source,

16).

(Fusion PartyBus

19).

> ZONE.

(Speaker Zone Settings, page

> ZONE.

(Controlling

™

20).

Music Playback