2.12 Special Tools
For electrical bonding testing, a milli-ohm meter is required.
No special tools are required for system checkout. See GDL 69/69A Installation Manual.
2.13 Additional Instructions
None.
2.14 Overhaul Period
The system does not require overhaul at a specific time period. Non operation of the unit may indicate
failure of the unit and the unit may require replacement. See troubleshooting section contained in the
GDL 69/69A Installation Manual, listed under reference documentation in paragraph 2.1 of this
document.
2.15 ICA Revision and Distribution
To revise this ICA, a letter must be submitted to the ACO or ODA along with the revised ICA. The ACO
or ODA will obtain AEG acceptance, and approve any revision to the Airworthiness Limitations in Section
1.4. After FAA acceptance/approval, Garmin will release the revised ICA for customer use, and provide
any required notification of the revision.
The latest revision of this document will be available on the Garmin website (www.garmin.com). A
Garmin Service Bulletin, describing ICA revision, will be sent to dealers if revision is determined to be
significant.
2.16 Assistance
Flight Standards Inspectors or the certificate holder's PMI have the required resources to respond to
questions regarding this ICA. In addition, the customer may refer questions regarding this equipment and
its installation to the manufacturer, Garmin International. Garmin International customer assistance may
be contacted during normal business hours via telephone 913-397-8200 or email from the Garmin web
site at garmin.com.
2.17 Implementation and Record Keeping
Modification of an aircraft by this Supplemental Type Certificate obligates the aircraft operator to include
the maintenance information provided by this document in the operator's aircraft maintenance manual
and/or the operator's aircraft scheduled maintenance program.
GDL 69/69A XM Satellite Radio
Instructions for Continued Airworthiness
190-00355-00 Rev.E
Page 8 of 8
Drukuj stronę