Garmin GTX GTX 330D Podręcznik pilota - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik pilota dla Wyświetlacz awioniki Garmin GTX GTX 330D. Garmin GTX GTX 330D 13 stron. Mode s transponder
Również dla Garmin GTX GTX 330D: Dodatek do podręcznika pilota (50 strony), Dodatek do podręcznika pilota (50 strony), Podręcznik pilota (13 strony), Instrukcja instalacji (49 strony)

Keys for Other GTX 330 Functions

IDENT Pressing the IDENT key activates the Special Position

Identification (SPI) Pulse for 18 seconds, identifying your transponder

return from others on the air traffic controller' s screen. The word IDENT

will appear in the upper left corner of the display during this time.

VFR Sets the transponder code to the pre-programmed VFR code selected

during installation configuration (this is set to 1200 at the factory). Pressing

the VFR key again restores the previous identification code. If the VFR Key

is pressed when disabled (dependent upon installation configuration) a VFR

Key Disabled message appears to indicate that no operation took place.

FUNC Changes the page shown on the right side of the display. Display

data includes Pressure Altitude, Flight Time, Altitude Monitor, Count Up,

and Count Down timers. Also displays Outside Air Temperature, Density

Altitude, Contrast, Display, and ADS-B Operation (dependent upon

installation configuration).

START/STOP Starts and stops the Altitude Monitor, Count Up, Count

Down, and Flight timers.

CRSR Initiates starting time entry for the Count Down timer and cancels

transponder code entry.

CLR Resets the Count Up, Count Down, and Flight timers. Cancels the

previous keypress during code selection and Count Down entry. Returns

cursor to the fourth code digit within five seconds after entry.

8 Reduces Contrast and Display Brightness when the respective fields

are displayed (dependent upon installation configuration) and enters the

number eight into the Count Down timer.

9 Increases Contrast and Display Brightness when the respective fields

are displayed (dependent upon installation configuration) and enters the

number nine into the Count Down timer.