Garmin ECHOMAP UHD2 9 SV Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Morski system GPS Garmin ECHOMAP UHD2 9 SV. Garmin ECHOMAP UHD2 9 SV 15 stron.

Item

Description

ECHOMAP UHD2 6/7/9 sv device

GPS antenna or other NMEA 2000 device

Ignition or in-line switch

NMEA 2000 power cable

NMEA 2000 drop cable

12 Vdc power source

NMEA 2000 female terminator or backbone extension cable

NMEA 2000 T-connector

NMEA 2000 male terminator or backbone extension cable

Connecting Devices Wirelessly to Share User Data and Sonar

You can connect two ECHOMAP UHD2 devices wirelessly to share user data and sonar.

See your Owner's Manual for more information.

Installing Locking Rings on the Cables

To help make the cable-routing process easier, some locking rings are packaged separately from the cables.

When installing a cable that does not have a locking ring installed at the factory, you must install the split-collar

locking ring on the cable to ensure a tight connection.

1 Separate the two halves of the locking ring

2 Align the two halves

3 Insert the O-ring

into the end of the connector.

4 After connecting the cable to the port, turn the locking ring clockwise to tighten it.

of the locking ring over the cable and snap them together.