Garmin Fishfinder 100 Blue Instrukcja obsługi - Strona 28
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Morski system GPS Garmin Fishfinder 100 Blue. Garmin Fishfinder 100 Blue 50 stron. Fishfinder blue series
Również dla Garmin Fishfinder 100 Blue: Specyfikacje (2 strony)
Drukuj stronę
Unit Operation
Setup Menu: Tools/Numbers Tabs
Noise Reject Manual Adjustment Slider
Normal Numbers
20
Noise Reject (continued)
Numbers Tab
like to see normal or large numbers on the chart. You can also configure
the unit to display 'Battery Voltage,' (water) 'Temperature,' and 'Speed' Over
Water if the unit is equipped with capable sensors. You can also set up how
the unit finds the digital 'Depth Number.' To access the 'Num' tab, place the
highlight over it using the arrow keys.
Number Size
'Depth,' 'Temperature,' 'Battery Voltage' and 'Speed' fields on the chart.
Large Numbers
To change the Noise Reject Setting:
1. Highlight the 'Tools' tab on the Setup Menu.
2. Highlight the 'Noise Reject' selection fi eld and press ENTER.
3. Choose 'Off,' 'Auto,' or 'Manual' and press ENTER.
To manually adjust the Noise Reject Setting:
1. Select 'Manual' in the 'Noise Reject' fi eld of the 'Tools' tab of the Setup
Menu, then press ENTER. A slider will appear below the 'Noise Reject'
selection fi eld.
2. Use the UP/DOWN Arrows to highlight the slider, then press ENTER.
3. Use the LEFT/RIGHT Arrows to manually adjust the Noise Reject Slider
to the desired setting, then press ENTER.
The 'Num' (Numbers) tab allows you to choose whether you would
This setting determines the size of the numbers displayed in the
To select Normal or Large Numbers:
1. Highlight the 'Num' tab on the Setup Menu.
2. Highlight the 'Number Size' selection fi eld and press ENTER.
3. Choose 'Normal' or 'Large' and press ENTER to accept the selection.