Garmin FLEET 790 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Morski system GPS Garmin FLEET 790. Garmin FLEET 790 27 stron.

Drukuj stronę
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go to an open area, away from tall buildings and
trees.
in the status bar indicates the device has established your
location.
Home Screen
NOTE: The home screen and customization options may vary
based on configuration by your fleet management company.
Swipe down to view notifications.
Swipe down twice to quickly change settings and backlight
brightness.
Hold to customize the wallpaper or add widgets to the home
screen.
Select to open the app drawer. The app drawer contains shortcuts
to all the apps installed on your device.
Adding Shortcuts to the Home Screen
1
Select
.
2
Swipe up or down to view additional applications.
3
Hold an application, and drag it to a location on the home
screen.
Viewing Notifications
1
Swipe down from the top of the screen.
The list of notifications appears.
2
Select an option:
• To launch the action or app mentioned in the notification,
select the notification.
• To dismiss a notification, swipe the notification to the right.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device.
2
The device has acquired GPS satellites and established your
location
(Acquiring GPS Signals, page
Bluetooth
®
technology is enabled.
Connected to a Wi‑Fi
®
network
page
16).
Mobile data signal strength (Garmin fleet 790 only)
Connected to hands-free calling
Active vehicle profile. Swipe down twice and select to view the
vehicle profile settings
(Vehicle Profiles, page
Battery charge level.

Adjusting the Screen Brightness

You can adjust the brightness using either the notification panel
or the settings menu.
1
Select an option:
• Swipe down twice from the top of the screen to expand
the quick settings in the notification panel.
• Select
> Display > Brightness Level.
2
Use the slider bar to adjust the brightness.
Vehicle Profiles
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Routing and navigation are calculated differently based on your
vehicle profile. The activated vehicle profile is indicated by an
icon in the status bar. The navigation and map settings on your
device can be customized separately for each vehicle type.
When you activate a truck vehicle profile, the device avoids
including restricted or impassable areas in routes based on the
dimensions, weight, and other characteristics you entered for
your vehicle.
Car Profile
The car profile is a preloaded vehicle profile intended for use in
an automobile. While using the car profile, the device calculates
standard automobile routes, and truck routing is not available.
Some truck-specific features and settings are not available while
using the car profile.
Adding a Vehicle Profile
You can add a vehicle profile that includes the weight,
dimensions, and other characteristics for your vehicle.
1
Select
> Navigation > Vehicle Profile >
2
Select an option:
• To add a straight truck with a permanently attached cargo
area, select Straight Truck.
• To add a tractor or a tractor-trailer combination, select
Tractor.
3
Follow the on-screen instructions to enter the vehicle
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information, such as the vehicle identification
number or trailer number.

Activating a Vehicle Profile

1
Select
> Navigation > Vehicle Profile.
2).
(Connecting to a Wireless Network,
(Hands-Free Calling, page
2).
WARNING
.
Vehicle Profiles
12).