Garmin GNC 420W Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Morski system GPS Garmin GNC 420W. Garmin GNC 420W 25 stron. Garmin gps receiver quick reference guide
Również dla Garmin GNC 420W: Dodatek do podręcznika pilota (24 strony), Dodatek do podręcznika pilota (50 strony), Skrócona instrukcja obsługi (23 strony), Dodatek do podręcznika pilota (24 strony), Podręcznik uzupełniający (12 strony)

Drukuj stronę
Garmin GNC 420W Skrócona instrukcja obsługi
Left-hand Keys and Knobs
In the GNC 420W and the GNS 430W, the
k
COM power/volume knob controls unit
power and communications radio volume.
Press the knob momentarily to enable/disable
automatic squelch control.
In the GNS 430W, the VLOC volume knob
j
controls audio volume for the selected VOR/
Localizer frequency. Press momentarily to
enable/disable the ident tone.
In the GNC 420W and GNS 430W, the large
y
left knob is used to tune the megahertz
(MHz) value of the standby frequency for
the COM transceiver or the VLOC receiver,
whichever is currently selected by the tuning
cursor.
In the GNC 420W and GNS 430W, the small
v
left knob is used to tune the kilohertz (kHz)
value of the standby frequency for the COM
transceiver or the VLOC receiver, whichever
is currently selected by the tuning cursor.
Press this knob momentarily to toggle the
tuning cursor between the COM and VLOC
windows.
In the GNC 420W and GNS 430W, the COM
W
flip-flop key is used to swap the active and
standby COM frequencies. Press and hold to
select emergency channel (121.500 MHz).
In the GNS 430W, the VLOC flip-flop key
V
is used to swap the active and standby VLOC
frequencies (i.e., make the selected standby
frequency active).

KEYS AND KNOBS

COM power/
VLOC volume
Small left knob
190-00356-01 Rev F
volume
COM flip-flop
VLOC flip-flop
Large left knob
3