Garmin GPSMAP 4210 Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Morski system GPS Garmin GPSMAP 4210. Garmin GPSMAP 4210 25 stron. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Również dla Garmin GPSMAP 4210: Ważne informacje dotyczące bezpieczeństwa (4 strony), Instrukcja obsługi (2 strony), Instrukcja instalacji (25 strony), Skrócona instrukcja obsługi (2 strony), Informacje techniczne (42 strony), Ważne informacje (2 strony), Podręcznik uzupełniający (24 strony)

Creating a Basic nMEA 2000 network

If your boat does not already have an existing NMEA 2000 network installed, you will need to create a basic NMEA 2000 network. For more

information on NMEA 2000, visit www.garmin.com.

to create a basic nMEA 2000 network

1. Connect the three included T-connectors together by their sides.

2. Connect the appropriate terminators to each end of the combined T-connectors.

3. Wire the included NMEA 2000 power cable to a 12 Vdc power source through a switch. Connect to the ignition switch for the boat if possible.

4. Connect the NMEA 2000 power cable to the top of one of the T-connectors.

5. Route and connect the included NMEA 2000 drop cables from the GPS 17x and from the GPSMAP 4000/5000 series chartplotter to the tops

of the other T-connectors.

NOTES:

• The diagram shows only the NMEA 2000 data connection to the GPSMAP 4000/5000 series chartplotter. The chartplotter must also be

connected to power or it will not function. See

• One GPS antenna will provide position data for every device on the NMEA 2000 network. Do not connect multiple GPS antennas if you are

using multiple chartplotters.

GPSMAP 4000/5000 Series Installation Instructions

GPSMAP 4000/5000

series chartplotter

Ignition or

in-line switch

Power cable

Fuse

12 Vdc battery

Female

terminator

Creating a Basic nMEA 2000 network

page

GPS 17x

antenna

Drop cables

terminator

T-connectors

Male