Garmin GPSMAP 500 Series Podręcznik pilota - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik pilota dla Morski system GPS Garmin GPSMAP 500 Series. Garmin GPSMAP 500 Series 28 stron. Flat-mount kit
Również dla Garmin GPSMAP 500 Series: Instrukcja obsługi (6 strony), Dodatek do podręcznika pilota (27 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik referencyjny (2 strony), Instrukcja obsługi (28 strony), Szablon (2 strony), Szablon (1 strony), Podręcznik konfiguracji (2 strony), Skrócona instrukcja obsługi (4 strony), Instrukcja obsługi (38 strony), Instrukcja obsługi (44 strony), Instrukcja instalacji (34 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę
Garmin GPSMAP 500 Series Podręcznik pilota
SECTION 3
SKYWATCH INTERFACE
Traffic Page Display Range
The display range on the Traffic Page can be changed
at any time.
Changing the display range on the Traffic
Page:
Press the RNG Key to zoom through the following
range options:
• 2 nm
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm for the SKY 899 only
Configuring Traffic Data on the Map Page
The display of traffic information is designed to closely
resemble the display symbology used by Goodrich on the
SKYWATCH.
Traffic is only displayed on the Map Page if aircraft
heading data is available. When heading is not available,
Traffic Advisories are displayed as non-bearing banners on
the Map Page. See the Garmin 400/500 Series Installation
Manual available at authorized Garmin service centers for
details.
Configuring traffic on the Map Page:
1)
Turn the small right knob to select the Map
Page.
Press the MENU Key to display the Page
2)
Menu.
3)
Turn the small right knob to select 'Setup
Map?'.
4)
Press the ENT Key. The flashing cursor
highlights the GROUP field.
Turn the small right knob to select 'Traffic'.
5)
3-4
6)
Press the ENT Key (Figure 3-5).
7)
Turn the large right knob to select the desired
Traffic Mode option.
Turn the small right knob to select the desired
8)
option
9)
Press the ENT Key. Repeat steps 7-9 for Traffic
Symbol and Traffic Label.
10) Return to the Map Page by pressing the CLR
Key.
Traffic mode allows the operator to choose which traffic
is displayed (all traffic, traffic and proximity advisories,
or traffic advisories only). The traffic symbol (Table 3-1)
is used to depict the type of traffic (400/500 Series and
Goodrich use the same symbology):
Traffic Advisories (TA)
Proximity Advisories (PA)
Other
400/500 Series Display Interfaces
Figure 3-5 Map Setup Menu
Type of Traffic
Symbol
Table 3-1
190-00140-10 Rev. E