Garmin GPSMAP 526s Informacje techniczne - Strona 33
Przeglądaj online lub pobierz pdf Informacje techniczne dla Morski system GPS Garmin GPSMAP 526s. Garmin GPSMAP 526s 42 stron. Flush mount template
Również dla Garmin GPSMAP 526s: Instrukcja instalacji (12 strony), Podręcznik referencyjny (2 strony), Ważne informacje dotyczące bezpieczeństwa (48 strony), Instrukcja obsługi (28 strony), Szablon (2 strony)
Drukuj stronę
•
For most Garmin chartplotters, select
•
For other Garmin marine devices, select
3. Enter the following command: "INSTANCE="
4. After the command, enter a whole number between 1 and 253, which indicates the engine number, followed by Done. For example,
INSTANCE=2Done indicates that the adapter is associated with engine number 2.
To configure the gauge type if the menu option is not displayed:
When connected to a gauge, the GET 10 adapter gauge type is set to auto Detect by default, and the adapter automatically detects the type of
gauge it is connected to. When you troubleshoot the gauge-type setting, if the engine-tilt reading on a connected Garmin chartplotter or marine
instrument changes with the engine RPM, the adapter may be detecting the wrong type of gauge.
1. From the NMEA 2000 Devices list, select the GET 10 device.
2. Select an option:
•
For most Garmin chartplotters, select
•
For other Garmin marine devices, select
3. Enter the following command: "GAUGETYPE="
4. After the command, enter one of the following options:
•
To automatically detect the gauge type, enter 0, followed by Done. For example, GAUGETYPE=0Done.
•
To indicate a one-coil gauge, enter 1, followed by Done. For example, GAUGETYPE=1Done.
To indicate a two-coil gauge, enter 2, followed by Done. For example, GAUGETYPE=2Done.
•
Restoring Factory Default Settings
You will lose all custom configuration settings when you restore factory default settings.
1. From the NMEA 2000 Devices list, select the GET 10 device.
2. Select an option:
•
For most Garmin chartplotters, select
•
For other Garmin marine devices, select
3. Select Yes.
GFL 10 (Garmin Fluid Level Adapter)
NotiCe: This section provides specific configuration information for the GFL 10 adapter using your compatible Garmin display device. To
access the NMEA 2000 configuration menu on your display device, consult the documentation provided with your display device.
Configuring the NMEA 2000 Fluid Type
You can indicate the type of fluid that is in the tank with which each GFL 10 adapter is associated.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
•
For most Garmin chartplotters, select
•
For other Garmin marine devices, select
3. Select a fluid type.
4. Select OK.
Configuring the Tank Number
If your boat has multiple fluid tanks, you can indicate which tank each GFL 10 adapter is associated with.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
•
For most Garmin chartplotters, select
Technical Reference for Garmin NMEA 2000 Products
Review
>
Generic
Config.
Config >Generic
Configuration.
Review
>
Generic
Config.
Config >Generic
Configuration.
Review
>
Factory
Defaults.
Config
>
Factory
Defaults.
Review
>
N2K Fluid
Type.
Config
>
N2K Fluid
Type.
Review
>
Tank
Number.
NMEA 2000 Checklist
2