AEG ProCombi BS9304001 Podręcznik użytkownika - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piekarnik AEG ProCombi BS9304001. AEG ProCombi BS9304001 48 stron. Oven
Również dla AEG ProCombi BS9304001: Podręcznik użytkownika (44 strony), Podręcznik użytkownika (36 strony), Podręcznik użytkownika (36 strony), Podręcznik użytkownika (48 strony)
Drukuj stronę
14
www.aeg.com
3. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function
Duration
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is
at approximately the set
temperature.
When the steam generator is
empty, an acoustic signal
sounds.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water tank.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
or End Time
.
Minute Minder
Duration
End Time
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with
the door open.
6.6 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
6.7 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
seconds. The heat-up indicator
alternates.
6.8 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Press
to activate the function. Use the
shuttle to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
for 3
to start.