Garmin GPSMAP 720/720s Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Morski system GPS Garmin GPSMAP 720/720s. Garmin GPSMAP 720/720s 2 stron. Bail mount template (multilingual)
Również dla Garmin GPSMAP 720/720s: Instrukcja instalacji (10 strony), Informacje techniczne (42 strony), Ważne informacje dotyczące bezpieczeństwa (48 strony), Szablon (2 strony)
Drukuj stronę
Turning the Chartplotter On or Off
WARNING
See the Important Safety and Product Information guide in the product box for product
warnings and other important information.
Turning On the Chartplotter
Press and release the
Power
key.
Turning Off the Chartplotter
Press and hold the
Power
key.
Marking a Waypoint or an MOB Location
Marking Your Present Location as a Waypoint
From the Home screen, select Mark.
Note: Mark your present position from any other screen by touching
the screen.
Creating a Waypoint at a Different Location
1. From the Home screen, select
Charts.
2. Select
Navigation Chart
or
Fishing
Chart..
3. Complete an action:
•
Touch a location on the chart.
•
Touch and drag the screen to pan to a new location. Touch a location on the chart.
4. Select
Create
Waypoint.
5. If you want to name the waypoint, select the waypoint on the right side of the screen and
select
edit
Waypoint.
6. Select
Name
and enter a name.
Marking and Navigating to an MOB Location
When you mark your current location as a waypoint, you can designate it as a man overboard
(MOB) location.
Complete an action.
•
From any screen, select
Mark
>
Man
overboard.
•
From the Home screen, select
Man
overboard.
An international MOB symbol marks the active MOB point and the chartplotter sets a course
back to the marked location using the Go To feature.
Adjusting the Backlight
Adjusting the Backlight
1. From the Home screen, select
tIP: Press and release the
2. Select Backlight.
3. Adjust the backlight:
•
Select
Auto
to allow the chartplotter to adjust the backlight automatically, based on
ambient light.
•
Adjust the slider manually.
Note: Select
Auto
to switch between Auto and Manual mode.
Showing and Configuring the Heading Line
The heading line is an extension drawn on the map from the bow of the boat in the direction
of travel. You can configure the appearance of the heading line for the Navigation chart or the
Fishing chart.
Mark
at the top of
Note: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select Charts.
2. Complete an action:
•
Select
Navigation Chart
Heading
Line.
Fishing Chart
•
Select
Line.
3. Complete an action:
•
Select Distance. Enter the distance to the end of the heading line.
•
Select time. Enter the amount of time until you reach the end of the heading line.
4. Select Done.
Configure
>
System
>
Beeper/Display
> Display.
Power
key from any screen to open the Display screen.
>
Menu
>
Navigation Chart Setup
>
Chart Appearance
Menu
Fishing Chart Setup
Chart Appearance
Heading
>
>
>
>
Navigating to a Marine Service
Navigating to a Marine Services Destination
CAUTION
The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart
information. That data does not ensure obstacle and bottom clearance. Carefully compare the
course to all visual sightings and avoid any land, shallow water, or other obstacles that may be
in your path.
When using Go To, a direct course and a corrected course may pass over land or shallow water.
Use visual sightings and steer to avoid land, shallow water, and other dangerous objects.
Note: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Where to?
>
2. Select the marine service category to which you want to navigate.
The chartplotter shows a list of the 50 nearest locations and the distance and bearing to each.
3. Select a destination.
tIP: Select
or
to view additional information or to show the location on a
chart.
4. Complete an action:
Go
to.
•
Select
Route
to.
•
Select
Guide to
•
Select
to use Auto Guidance.
5. Review the course indicated by the magenta line.
>
Note: When using Auto Guidance, a gray line within any part of the magenta line indicates
that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the
settings for minimum safe water depth and minimum safe obstacle height.
6. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.
Go to
www.garmin.com
for additional documentation and information.
Garmin
, the Gamin logo, GPSMAP
, BlueChart
®
®
Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be
used without the express permission of Garmin.
© 2010 Garmin Ltd. or its subsidiaries
May 2010
Part Number 190-01155-01 Rev. B
offshore
Services.
, and g2 Vision
are trademarks of Garmin
®
®
Printed in Taiwan