Garmin FUSION XS Series Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie morskie Garmin FUSION XS Series. Garmin FUSION XS Series 13 stron. Marine wake tower speakers
Również dla Garmin FUSION XS Series: Instrukcja instalacji (11 strony), Instrukcja instalacji (6 strony), Instrukcje instalacji (4 strony), Instrukcja instalacji (6 strony)
Drukuj stronę
Registering Your Fusion Device
Help us better support you by completing our online registration today.
• Go to www.fusionentertainment.com.
• Keep the original sales receipt, or a photocopy, in a safe place.
Cleaning the Subwoofer
Do not use harsh or solvent-based cleaners on the subwoofer. Using such cleaners may damage the product
and void the warranty.
When mounted correctly, this subwoofer is rated IP65 for protection in the harsh marine environment from the
front of the subwoofer. The subwoofer is not designed to withstand high pressure water spray, which may occur
when you wash down your vessel. Failure to carefully spray-clean the vessel may damage the product and void
the warranty.
1 Clean all salt water and salt residue from the grille with a damp cloth soaked in fresh water.
2 Use a mild detergent to remove a heavy buildup of salt or stains.
Troubleshooting
Before you contact your FUSION dealer or service center, you should perform a few simple troubleshooting
steps to help diagnose the problem.
If the FUSION subwoofer has been installed by a professional installation company, you should contact the
company so the technicians can assess the problem and advise you about possible solutions.
There is no sound coming from the subwoofer
• Verify that all connections are connected correctly to the proper terminals.
The system lacks bass
• Verify that the subwoofer is attached firmly to the mounting surface.
The audio is distorted
• Verify that the panels surrounding the subwoofer on the vessel are not rattling.
• Verify that the amplifier is connected to the subwoofer terminals correctly.
• If the subwoofer is connected to an amplifier, verify that the input level of the amplifier is matched to the
output level of the stereo.
For more information, see the manual for the amplifier.
The LED lights will not turn on
• Verify that all wiring connections are correct and tight.
The LEDs pulse with the bass notes of the music
• Install a FUSION LED voltage regulator (SG-VREGLED).
XS Series Subwoofer Installation Instructions
NOTICE
7