AEG F89078VI-S Podręcznik ogólny - Strona 21

Przeglądaj online lub pobierz pdf Podręcznik ogólny dla Zmywarka AEG F89078VI-S. AEG F89078VI-S 43 stron. 18” fully integrated dish washer
Również dla AEG F89078VI-S: Podręcznik użytkownika (35 strony), Podręcznik użytkownika (20 strony)

Drukuj stronę

USER INSTRUCTIONS

4.2.1

Adding the rinse-aid

The rinse aid helps the dishes dry faster and prevents the formation of scale de-

posits and staining; it is automatically added to the water during the fi nal rinse

cycle, from the container situated on the inner side of the door .

To add rinse aid:

•

Open the door.

•

Rotate the container cover (ref. A fi g. 4-04) anticlockwise by ¼ of a turn and

remove it.

•

Add the rinse aid until the container is full (approximately 140 ml). The optical

level indicator (ref. B fi g. 4-04), on the side of the cap should be completely ob-

scured. Refi ll the rinse aid when the optical level indicator becomes clear again,

or when the rinse aid warning light illuminates (see "Description of controls"

manual).

•

Replace the cover (ref. A fi g. 4-04) by turning it in a clockwise direction until it

is fully closed.

•

Use a cloth to remove any spillage of rinse aid which might lead to the forma-

tion of excess foam.

4.2.2

Adjusting the rinse-aid dispenser setting

The rinse-aid dispenser can be set to one of 6 diff erent levels. The dishwasher is

factory set for medium water hardness (selector set to "3"). To change the setting,

turn the dispenser selector (ref. c fi g. 4-04) to the desired position: the amount of

rinse-aid dispensed is proportional to the position of this selector. Make sure that

the minimum amount of rinse-aid (selector turned to "1") is approximately 1 ml

and the maximum amount (selector turned to "6") is approximately 6 ml.

Rev 0.0

Fig. 4-04