AEG FAVORIT 40620 Instrukcje użytkownika - Strona 40

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Zmywarka AEG FAVORIT 40620. AEG FAVORIT 40620 48 stron. Aeg dishwasher

Installation and Connection Instructions

The following section is only applicable to dishwashers that have a

safety valve on the threaded hose fitting for the tap:

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is

next to the tap. Therefore the water inlet hose is only under pressure

while the water is running. If the water inlet hose starts to leak during

this operation, the safety valve cuts off the running water and the

draining pump in the dishwasher is switched on.

Please take care when installing the water inlet hose:

– The distance between the bottom

edge of the safety value and the

floor on which the dishwasher is

standing must be at least 30 cm:

– The electrical cable for the safety

valve is in the double-walled water

inlet hose. Do not immerse the

water inlet hose or the safety valve

in water.

– If the water inlet hose or the safety

valve is damaged, remove the

mains plug immediately.

– A water inlet hose with safety valve

must only be replaced by a

specialist or Customer Services.

– Place the water inlet hose in such a way that it is never higher than

the bottom edge of the safety valve.