Garmin Mobile 20 Instrukcja konfiguracji i obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji i obsługi dla Wyposażenie morskie Garmin Mobile 20. Garmin Mobile 20 20 stron. Garmin cell phone - mobile phone user manual
Również dla Garmin Mobile 20: Instrukcja instalacji (12 strony), Instrukcja instalacji (15 strony), Deklaracja zgodności (1 strony), Skrócona instrukcja obsługi (2 strony), Deklaracja zgodności (1 strony), Specyfikacje (2 strony), Instrukcja obsługi (29 strony), (fiński) Instrukcja obsługi (20 strony)

Drukuj stronę

Garmin Mobile 20 Instrukcja konfiguracji i obsługi

Mount Your Phone

➌

Select the adapter cable that fits your phone.

Additional adapter cables are available at

http://my.garmin.com/shop.

Connect the adapter cable to the power connector

on your phone and connect the other end of the

adapter cable into the power connector on the

bottom of the phone mount. This charges your

phone while it is in the mount.

Gently pull the slide bars away from the mount.

Slide your phone into the mount.

Adjust the posts for the best fit.

NOte: Some phones will not charge outside of a

specific temperature range. If your phone does not

charge, refer to the phone's documentation for more

information.

To remove your phone from the mount, disconnect the

cable, turn the phone sideways, and remove the phone.

Plug in the GPS 20SM

➍

Plug the GPS 20SM into an available power receptacle

in your vehicle; the GPS 20SM automatically turns on.

Pair the GPS 20SM

➎

Bluetooth

wireless technology establishes a wireless

link between your mobile phone and the GPS 20SM.

See

www.garmin.com/mobilephones

mobile phone is compatible with the GPS 20SM.

The wireless connection between your phone and the

Bluetooth GPS is created automatically. To use the

hands-free features of the GPS 20SM, you must "pair"

the two devices to establish a wireless connection.

Close the Garmin Mobile XT application.

Make sure your mobile phone and GPS 20SM are

turned on and within 10 meters of each other.

Enable your mobile phone's Bluetooth component.

This might be in a menu called Settings, Bluetooth,

Connections, or Hands-free.

Initiate a search for Bluetooth devices.

Select the GPS 20SM from the list of devices.

Enter the GPS 20SM's Bluetooth PIN (1234) into

your mobile phone.

For more specific instructions on pairing your phone,

refer to your phone's documentation.

to verify that your

Garmin Mobile™ 20 set up and go!