Garmin GHS 10i Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Radio morskie Garmin GHS 10i. Garmin GHS 10i 12 stron. Important product and saftey information (multilingual)
Również dla Garmin GHS 10i: Instrukcja instalacji (12 strony), Instrukcja instalacji (10 strony), Bezpieczeństwo i informacje o produkcie (20 strony)

Drukuj stronę

Connecting the VHF 300 Series Radio to a NMEA 2000 Network

You can connect the VHF 300 series radio to your existing NMEA 2000 network, or you can build a basic NMEA 2000 network to connect to

another NMEA 2000-compatible device, such as a chartplotter. For more information on NMEA 2000 and to purchase required connectors, go

to www.garmin.com.

To connect the VHF 300 series radio to your existing NMEA 2000 network:

1. Determine where you would like to connect the radio to your existing NMEA 2000 backbone.

2. Disconnect one side of a NMEA 2000 T-connector from the backbone at an appropriate location.

If you need to extend the NMEA 2000 backbone, connect an appropriate NMEA 2000 backbone extension cable to the side of the

T-connector you disconnected.

3. Add a T-connector (not included) for the radio to the NMEA 2000 backbone by connecting it to the side of the T-connector you disconnected.

4. Route a NMEA 2000 drop cable (not included) to the bottom of the T-connector added in step 3 to your NMEA 2000 network. Use a drop

cable with a length up to 20 ft. (6 m).

5. Connect the drop cable to the T-connector and the NMEA 2000 port on the VHF 300 Series transceiver box.

NotICe: If you have an existing NMEA 2000 network on your boat, it should already be connected to power. Do not connect an additional NMEA

2000 power cable to an existing NMEA 2000 network, because only one power source should be connected to a NMEA 2000 network.

➊

➋

Connecting the VHF 300 Series Radio to an

Existing NMEA 2000 Network

➊

VHF 300 series transceiver box

➋

NMEA 000 device (not included)

➌

Drop cable (not included)

➍

T-connector (not included)

➋

➌

➍

➎

Existing NMEA 000 network

➏

Ignition or in-line switch

➐

Fuse

➑

1 Vdc battery

➏ ➐

➑

➒

➓

Creating a Basic NMEA 2000 Network

➒

NMEA 000 power cable (not included)

➓

Terminator (not included)

➊

➋

➌

➍

➓

VHF 300 Series Installation Instructions