Garmin GTX 335 Series Podręcznik pilota - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik pilota dla Radio morskie Garmin GTX 335 Series. Garmin GTX 335 Series 36 stron. All-in-one ads-b transponder

Garmin GTX 335 Series Podręcznik pilota
The ON key selects the on mode.
ON
The transponder replies to interrogations.Replies do not include pressure
altitude.
The Reply (
responding.
The ALT key selects the alt mode.
ALT
Always use Alt mode while in the air and on the ground, unless
otherwise requested by ATC.
All aircraft air/ground state transmissions are handled via the GTX 3X5
transponder and require no pilot action.
The transponder replies to identification and altitude interrogations.
The Reply (
The GTX 3X5 transmissions include pressure altitude.
The VFR key sets the transponder code to the preprogrammed VFR
VFR
code.This is factory set to 1200, but.may be changed during installation
configuration.
To restore the previous identification code, press the VFR key a second time.
To toggle between these two codes, continue to press the VFR key.
The IDENT key activates the IDENT function for 18 seconds. This sets the
IDENT
transponder apart from others on the air traffic controller's screen.
During this time the word "IDENT" will appear in the upper left corner of
the display.
The SBY key selects the standby mode.
SBY
The transponder will not reply to any interrogations or transmit ADS-B Out.
If BT functions are enabled, BT functionality remains operational.
The GTX 345 will continue to receive ADS-B In information, but will not be a
TIS-B participant.
2-2

Table 2-1 Mode Section Key Functions

) symbol on the display indicates the transponder is
) symbol indicates the transponder is responding.
GTX 335/345 Pilot's Guide
190-01499-00 Rev. C