AEG FAVORIT 44630 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka AEG FAVORIT 44630. AEG FAVORIT 44630 40 stron.

To deactivate the rinse aid indicator light be sure that the

dishwasher is off and then proceed as follows:

1. Press INTENSIV 70° and 30 MIN programme push buttons simultaneously.

2. While keeping the programme push buttons INTENSIV 70° and 30 MIN pressed

switch on the dishwasher by pressing the On/Off push button. The On/Off

indicator light comes on. At the same time, the indicator lights of the

INTENSIV 70° and 30 MIN push buttons start flashing.

3. Press the 30 MIN push button, the correspondent indicator light keeps flashing

while the indicator light of the INTENSIV 70° push button turns off. At the same

time the indicator light "end of programme" starts to flash.

4. Press the 30 MIN push button again, the "end of programme" indicator light

turns off, this means that the rinse aid indicator light has been deactivated.

5. To memorise the operation, switch off the dishwasher by pressing the On/Off

push button.

To reactivate the rinse aid indicator light follow the same process until the "end of

programme" indicator light starts to flash.

Adjusting the dose

According to the finish and drying results obtained

adjust the dose of rinse aid by means of the 6

position selector (C) (position 1 minimum dosage,

position 6 maximum dosage).

Use the tip of a screwdriver to rotate the selector.

Increase the dose if there are drops of water or

lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the

dishes.

SO449

SO451

BR02