Garmin VHF 210 AIS series Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Radio morskie Garmin VHF 210 AIS series. Garmin VHF 210 AIS series 22 stron.
Również dla Garmin VHF 210 AIS series: Instrukcje instalacji (4 strony)
Drukuj stronę
Directory
You can store the MMSI numbers of vessels and stations, and
assign names to them for quick access or for identification
purposes.
Viewing Saved Vessels and Stations in the Directory
1
Select DSC > DIRECTORY > DIRECTORY.
2
Select a saved vessel or station.
Adding an Entry to the Directory
1
Select DSC > DIRECTORY > ADD ENTRY.
2
Enter the MMSI number
3
Enter a name (optional).
4
Select ACCEPT.
Editing an Entry in the Directory
1
Select DSC > DIRECTORY > EDIT ENTRY.
2
Select an entry.
3
Edit the MMSI number, the name, or both
page
4).
4
Select ACCEPT.
Deleting an Entry from the Directory
1
Select DSC > DIRECTORY > DELETE.
2
Select an entry.
3
Select YES.
Adding a Group
A DSC group is a collection of specific vessels, such as a sailing
club or flotilla, that share a single group MMSI number.
1
Select DSC > GROUP > ADD ENTRY.
2
Enter the group MMSI number
3
Enter a name for the group (optional).
4
Select ACCEPT.
Editing a Group
1
Select DSC > GROUP > EDIT ENTRY.
2
Select a group.
3
Edit the group MMSI number, the name, or both
Text, page
4).
4
Select ACCEPT.
Deleting a Group
1
Select DSC > GROUP > DELETE.
2
Select a group.
3
Select YES.
DSC Settings
Manual Position Information
If you do not have a GPS device connected to your radio, you
can manually enter your position and time of entry. The position
data is transmitted with DSC calls. When you enter the position
and time manually, MANUAL POS appears on the screen.
Manually entered position information must be updated
regularly, and the radio displays two alerts to remind you to
update the position data.
• When the position data you entered manually is more than
four hours old, DATA IS OVER 4 HOURS OLD appears on
the screen. The radio continues to transmit this position data,
but you should update it before it becomes invalid.
• When the position data you entered manually is more than
23.5 hours old, it is considered invalid and DATA IS INVALID
appears on the screen. The radio does not transmit invalid
position data, and you should update it immediately.
8
(Entering Text, page
4).
(Entering Text,
(Entering Text, page
(Entering
Entering Position Information Manually
1
Select MENU > SYSTEM > MANUAL GPS.
2
Enter your current coordinates and the present time
Text, page
3
Select ACCEPT.
Changing the Channel to 16 Automatically
By default, the radio changes to channel 16 automatically when
receiving distress, distress relay, and all-ships urgency calls. In
certain situations, when you must continually monitor a channel
to maintain uninterrupted communication with another vessel,
for example, you can disable this feature.
1
Select MENU > DSC > AUTO CHANGE CH..
2
Select an option:
• To set the radio to switch automatically to channel 16
when you receive a qualifying call, select ON.
• To set the radio to prompt you to accept or decline a
channel change when you receive a qualifying call, select
OFF.
Sending Position Replies Automatically
You can configure the radio to respond to incoming position
requests automatically.
1
Select MENU > DSC > POSITION REPLY.
2
Select an option:
• To send position information automatically to all position
requests, select AUTO.
• To send position information only when you review and
approve the request, select MANUAL.
Automatic Transmitter Identification
4).
Automatic Transmitter Identification System (ATIS) is a vessel
identification system used on certain inland waterways in some
European countries. See your Garmin dealer to program your
VHF radio if you plan to use your radio on waterways that are
within the bounds of the Regional Arrangement Concerning the
Radiotelephone Service on Inland Waterways (the Basel
Agreement). ATIS is prohibited outside the European inland
waterways that are covered by the Basel Agreement.
When you enable ATIS, your radio sends a data signal
identifying your station at the end of every transmission. Data
identifying your position is not sent, but your position is
calculated through the method of triangulation by coastal
stations that receive your transmissions.
To enable ATIS, you must enter your ATIS identification number
(Entering Your ATIS Identification Number, page
on ATIS
(Turning On and Off ATIS, page
Garmin dealer to determine your ATIS identification number and
to learn about ATIS requirements for your region.
Your radio disables these functions when you enable ATIS.
• Digital Selective Calling (DSC)
• Monitor two or three channels (Dual watch and Tri watch)
• Scanning channels
International channels 6, 8, 10, 11, 12, 13, 14, 71, 72, 74, and
77 restrict transmitting to low-power (1 W) when you enable
ATIS.
Entering Your ATIS Identification Number
You can enter your ATIS identification number only once. If you
must change your ATIS identification number after entering it,
you must take your radio to your Garmin dealer for
reprogramming.
4).
System
NOTICE
Automatic Transmitter Identification System
(Entering
8), and turn
9). See your