Garmin VHF 315 Series Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Radio morskie Garmin VHF 315 Series. Garmin VHF 315 Series 15 stron.
Również dla Garmin VHF 315 Series: Instrukcja instalacji (6 strony), Instrukcja obsługi (32 strony)
Drukuj stronę
Important Safety Information
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
Tools Needed
• Pencil
• Drill
7
• 22 mm (
/
in.) drill bit or hole saw
8
1
• 3 mm (
/
in.) drill bit
8
1
• 13 mm (
/
in.) drill bit
2
3
• 4.76 mm (
/
in.) wrench (for mounting the handset connector)
16
• Additional drill bits appropriate for the surface and hardware
• Phillips screwdriver
• Rotary cutting tool or jigsaw (for mounting the active speaker)
• Marine sealant (optional)
Mounting Considerations
This device should be mounted in a location that is not exposed to extreme temperatures or conditions. The
temperature range for this device is listed in the product specifications. Extended exposure to temperatures
exceeding the specified temperature range, in storage or operating conditions, may cause device failure.
Extreme-temperature-induced damage and related consequences are not covered by the warranty.
• You must mount the device in a location where it will not be submerged.
• You must mount the device in a location with adequate ventilation where it will not be exposed to extreme
temperatures.
June 2021
VHF 315 SERIES
INSTALLATION INSTRUCTIONS
WARNING
CAUTION
NOTICE
NOTICE
GUID-395B9869-0DCF-4E17-A266-0D9FF08A27DE v3