Garmin VHF 725e Instrukcja obsługi - Strona 36

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Radio morskie Garmin VHF 725e. Garmin VHF 725e 44 stron. Waterproof marine radios
Również dla Garmin VHF 725e: Specyfikacje (2 strony)

Drukuj stronę

Maintenance

Troubleshooting

Storage:

Store the VHF 725e in a cool, dry location when not used for

prolonged periods. When stored for more than six months, remove

alkaline batteries to prevent leakage from expended cells. While the

GARMIN VHF 725e is designed to withstand immersion in water

(with or without the battery pack in place) it should be treated like

all quality electronic equipment. Wipe away any water accumula-

tion from the surface of the unit and use a paper towel or other

absorbent material to wick out any moisture from the battery cavity.

Exposure of battery terminals to salt spray may cause corrosion and

loss of conductivity. Be certain to keep contacts dry and away from

corrosive elements. Storage temperature should not vary from:

below -4 degrees F (-20 degrees C) and above 158 degrees F (70 C)

Cleaning:

Clean exterior portions of the VHF 725e with a mild soap and

water solution. Do not use harsh detergents or solvent based

cleaning agents. Isopropyl alcohol is acceptable. Wipe dry with a

clean, non-abrasive cloth.

Battery Maintenance:

Keep battery contacts clean. Use only the NiCad Battery Pack or

types of batteries specified for use with VHF 725e. The VHF 725e

accepts six (6) standard "AA" alkaline, rechargeable alkaline or

rechargeable NiCad cells when the optional battery tray is used.

It is advisable to maintain a supply of replacement batteries if the

VHF 725e is to be placed in service for a prolonged period where

recharging of the NiCad Battery Pack is not possible and replace-

ment batteries cannot be easily obtained.

NOTE: Whenever possible, transmit with 1 watt power to prolong battery

life.