Garmin A03598 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Produkt do pielęgnacji zwierząt domowych Garmin A03598. Garmin A03598 32 stron.

Plug the small end of the power cable

into the mini-USB port on the charging

clip cable.

Plug the power cable into a power

source.

The status LED is solid red when the

collar is charging.

After the status LED turns solid green,

remove the charging clip from the

collar.

Acquiring Satellite Signals

Both the collar and handheld device must

acquire satellite signals before you put the

collar on your dog. Acquiring satellites can

take a few minutes.

Go outdoors to an open area.

Turn on both devices (page 2).

Select the power key on the handheld

device.

Quick Start Manual

shows the GPS signal strength.

When the collar has acquired satellite

signals, the status LED flashes a double-

blink or triple-blink in green.

Adding a Dog to the A03595 Handheld

The handheld device can track up to 20

dogs with dog collar devices. If you

purchase additional dog collar devices,

you can add them to the handheld device.

Bring your dog collar device within

range of the handheld device.

NOTE: The devices should be close

enough to touch.

Select DOG.

Select Add Dog.

Follow the on-screen instructions.

NOTE: An error message could

appear if there is a conflict with the ID

number of another dog.

After pairing is complete, you can add the

dog collar device to additional handheld

devices using the dog collar device track

code or control code. For more

information, go to www.garmin.com

/manuals/XXXX.