Brother 3320CN - Color Inkjet - All-in-One Podręcznik szybkiej konfiguracji - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Wszystko w jednej drukarce Brother 3320CN - Color Inkjet - All-in-One. Brother 3320CN - Color Inkjet - All-in-One 42 stron. Quick setup guide - english

Drukuj stronę

Step 1

• DO NOT remove ink cartridges if

• DO NOT shake the ink cartridges.

• Brother strongly recommends

■ If you mix the colors by installing an ink

cartridge in the wrong position, you must

clean the print head by running several

cleaning cycles after correcting the

cartridge installation. (See "Cleaning the

print head" on page 12-10 of the User's

Guide.)

■ Once you open an ink cartridge, install it in

the MFC and use it up within six months of

installation. Use unopened ink cartridges

by the expiration date written on the

cartridge package.

■ If Ink Empty shows on the LCD after you

install the ink cartridges, check to make

sure the ink cartridges are installed

correctly.

Setting Up the Machine

you do not need to replace them.

If you do so, it may reduce the ink

quantity and the MFC will not

know the quantity of ink left in

the cartridge.

If ink stains your body or

clothing, wash with soap or

detergent immediately.

that you do not refill the ink

cartridges provided with your

machine. We also strongly

recommend that you continue to

use only Genuine Brother Brand

replacement ink cartridges.

Using or attempting to use

potentially incompatible inks

and/or cartridges in your

machine may cause damage to

the machine itself and/or it may

result in unsatisfactory print

quality. Our warranty coverage

does not apply to any problem

that was caused by the use of

unauthorized third party ink and/

or cartridges. To protect your

investment and guarantee your

print quality please continue to

replace consumed ink cartridges

with only Genuine Brother

Branded Supplies.

Color Block Quality and

Alignment Check

After the cleaning cycle is finished, the LCD

shows;

Set Paper and

Press Start

Make sure the paper is loaded in the paper

tray.

Press Color Start.

The MFC starts printing the PRINT

QUALITY CHECK SHEET (only during

initial ink cartridge installation).

Check in Step A

Check in Step B