Brother 4570CDW Bezpieczeństwo i prawo - Strona 3

Przeglądaj online lub pobierz pdf Bezpieczeństwo i prawo dla Wszystko w jednej drukarce Brother 4570CDW. Brother 4570CDW 21 stron. Printer

Brother 4570CDW Bezpieczeństwo i prawo
Instead:
• Keep a gap of roughly 4 in. (100 mm) between the ventilation hole and the wall.
• Place the product on a solid surface, never on a bed, sofa, rug, or other similar soft surface.
• DO NOT place this product near or over a radiator or heater.
• DO NOT place this product in a "built-in" installation unless adequate ventilation is provided.
DO NOT put objects on top of the product. Doing so could increase the risk of overheating
and/or fire should the product malfunction.
DO install your product near an AC power outlet that is easily accessible. In the event of an
emergency, easy access to the plug and outlet will allow you to shut off power to the product
quickly and completely.
Plastic bags are used in the packing of your product and drum unit. Plastic bags are not toys.
To avoid the danger of suffocation, keep these bags away from babies and children and dispose
of them properly.
CAUTION
Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure
that the product is in a safe location where it cannot be accidentally knocked-over, which could
cause injury to you and serious damage to the product. Also ensure that cords are secured so
as not to pose a tripping hazard. DO NOT place this product on an unstable cart, stand, or table.
The product is heavy and may fall, causing injury to you, and serious damage to the product.
DO NOT eat the Silica Pack. Discard immediately.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or generate magnetic fields.
Doing so may interfere with the operation of the product, causing print quality problems.
• DO NOT place your product next to sources of interference, such as speakers or the base units
of non Brother cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic
timers. Disruption of power can delete information from the product's memory.
• DO NOT connect your product to an AC power outlet on the same circuit as large appliances
or other equipment that requires a significant amount of electricity to operate. Operating this
product in conjunction with the other product(s) could create an overvoltage, tripping your
circuit breaker or blowing your fuse.
3