Brother DCP-150C Podręcznik szybkiej konfiguracji - Strona 17
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Wszystko w jednej drukarce Brother DCP-150C. Brother DCP-150C 26 stron.
Również dla Brother DCP-150C: Podręcznik szybkiej konfiguracji (2 strony)
Drukuj stronę
Installing the Driver & Software
6
The installation of ScanSoft™ PaperPort™
11SE will automatically start and is followed by
the installation of MFL-Pro Suite.
7
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
8
Choose Standard, and then click Next. The
installation continues.
9
When this screen appears, go to the next step.
10
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
11
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine as shown
below.
12
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Then, connect the cable to your computer.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 2 metres.
Windows
symbol. You will find the
®
15