Brother MFC-J4410DW Podręcznik szybkiej konfiguracji - Strona 35

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Wszystko w jednej drukarce Brother MFC-J4410DW. Brother MFC-J4410DW 47 stron. Guía de wi-fi direct
Również dla Brother MFC-J4410DW: Podręcznik (36 strony), Podręcznik (22 strony), Podręcznik bezpieczeństwa produktu (17 strony), Podręcznik (13 strony), Podręcznik (13 strony), Podręcznik (22 strony), Podręcznik szybkiej konfiguracji (45 strony), Podręcznik bezpieczeństwa produktu (20 strony), Skrócona instrukcja obsługi (29 strony), Podręcznik bezpieczeństwa produktu (25 strony), Podręcznik Start Here (47 strony), (Hiszpański) Podręcznik Guia De Web Connect (38 strony), (Hiszpański) Podręcznik (24 strony), (Angielski) Podręcznik bezpieczeństwa produktu (16 strony), (Hiszpański) Podręcznik (12 strony), (Hiszpański) Podręcznik (11 strony), (Angielski) Skrócona instrukcja konfiguracji (47 strony), (Hiszpański) Podręcznik funkcji (19 strony)

Drukuj stronę
Brother MFC-J4410DW Podręcznik szybkiej konfiguracji
For Wireless Network Users
One-push setup using
19
WPS or AOSS™
(Windows
and mobile devices)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
c
Press
.
Press s or t to display WPS/AOSS.
Press WPS/AOSS.
When Network I/F switched to
Wireless. is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
NOTE
If your wireless access point/router supports WPS
(PIN Method) and you want to configure your
machine using the PIN (Personal Identification
Number) Method, see Configuration using the
PIN Method of WPS (Wi-Fi Protected Setup) in
the Network User's Guide.
d
When the Touchscreen indicates you should
start WPS or AOSS™, press the WPS or
AOSS™ button on your wireless access
point/router. See the user's guide of your
wireless access point/router for instructions.
Then press OK and your machine will now
automatically detect which mode (WPS or
AOSS™) your wireless access point/router
uses and try to connect to your wireless
network.
®
, Macintosh
e
A connection result message appears for
60 seconds on the Touchscreen and a WLAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 36.
Wireless setup is now complete. The
Wi-Fi button at the upper right of the
Touchscreen changes to a four-level
indicator that displays the wireless signal
strength of your access point/router.
The Wi-Fi LED
lights up, indicating that the machine's
Network I/F is set to WLAN.
NOTE
For Mobile Device users, please go to the User's
Guide for the application you are using (Ex.
AirPrint, Brother iPrint&Scan or other
applications) for additional details on how to use
your machine with the application. To download
the User's Guide for the application you are using,
please go to the manuals download selection on
your model's home page of the Brother Solutions
Center at http://solutions.brother.com/.
To install MFL-Pro Suite, continue to
step 20.
®
For Windows
users:
Now go to
Page 38
For Macintosh users:
Now go to
Page 41
on the control panel
35