Brother MFC-J615W Instrukcje dotyczące połączenia

Przeglądaj online lub pobierz pdf Instrukcje dotyczące połączenia dla Wszystko w jednej drukarce Brother MFC-J615W. Brother MFC-J615W 2 stron. Quick setup guide - spanish
Również dla Brother MFC-J615W: Podręcznik szybkiej konfiguracji (41 strony), (Angielski) Skrócona instrukcja konfiguracji (40 strony)

MFCJ615W MAC Network Connection Repair Instructions

Difficulty printing from your Mac can occur for various reasons. The most common reason a Brother machine

may stop printing is because the connection between the computer and the Brother machine is lost. This can

occur as a result of wrong settings or configuration on the printer driver. There are several basic

STEP 1: VERIFY THE CONNECTION

1. Print the Network Configuration or User Settings List on the brother machine and obtain the IP

Address. For instructions on how to print this report, refer to the solution:

Network Configuration

2. On the Mac, open HDD => Applications => Utilities => Network Utility. Click the PING button

at the top of the window and enter the brother machine's IP address in the appropriate section.

3. Select Send Only _ Pings and change the value to 4.

4. Click the PING button to the right. If the Brother machine responds, continue troubleshooting. If the

Brother machine does not respond, then you will need to setup your machine on the network properly

using the Initial Setup steps in order to print.

STEP 2: VERIFY THE BROTHER MACHINE IS POWERED ON AND THERE ARE NO ERRORS

1. If the LCD screen is blank, then the Brother machine is not powered on or is in sleep mode. Press a

button on the machine to see if it wakes from sleep mode. If it does not, then verify that it is plugged

into a working outlet and any power switches are turned to the ON position.

2. Check the LCD screen for any error messages. An example would be "Paper Jam" or "Ink/Toner

Empty". If the LCD screen shows an error, troubleshoot to clear the particular problem.

STEP 3: VERIFY THAT THE PRINTER DRIVER IS INSTALLED

1. From the Apple Menu or in the Dock select System Preferences.

2. Under Hardware click the Print & Fax icon.

3. Verify that the Brother printer in the list. If the Brother printer is listed, continue to STEP 4. If the

Brother printer is not listed, the driver may not be installed properly. Refer to one of the following

solutions based on your connection type:

How do I install the Brother MFL-Pro suite from the CD in Macintosh OSX 10.4, 10.5, or 10.6 using

the Wireless Network interface?

How do I install the Brother MFL-Pro suite from the CD in Macintosh OSX 10.4, 10.5, or 10.6 using

the Wired Network interface?

STEP 4: VERIFY THAT THE BROTHER PRINTER IS SET AS DEFAULT

This is especially important if you use the print icon to print from within applications. To set the printer as

default:

1. While in Print & Fax click the Default Printer drop down and select the appropriate Brother

"Printer Driver".

STEP 5: VERIFY THAT THE PRINTER STATUS IS READY AND THE PRINT QUEUE IS EMPTY

1. While viewing the printer list, verify that the Brother "Printer Driver" shows Idle not Paused.

If the printer is paused, double click the "Printer Driver" and click RESUME PRINTER at the top

of the printer queue window or in the File Menu click Printer => Resume Printer.

troubleshooting steps you can take to resolve this issue.

report?"

www.brother-usa.com

"How do I print the