AEG 61300M Instrukcja obsługi i instalacji - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Hob AEG 61300M. AEG 61300M 22 stron. Glass ceramic cooking surface
Również dla AEG 61300M: Instrukcja instalacji i obsługi (17 strony)
Drukuj stronę
1
Safety Instructions for the Installer
• This hob must be installed by qualified personnel, according to the
manufacturer's instructions and to the relevant country standards.
• In respect of fire protection, this appliance corresponds to type Y (IEC
335-2-6). Only this type of appliance may be installed with a high
cupboard or wall on one side.
• It is not permitted to fit drawers below the cooking surface.
• Protection against electric shock must be provided by the installation.
• The kitchen unit in which the appliance is fitted must satisfy the
requirements of DIN 68930 in respect of stability.
• Built-in ovens and cooking surfaces are fitted with special connector
systems. They may only be combined with appliances with a matching
system.
• All cut surfaces are to be sealed with a suitable sealant for protection
against moisture.
• On tiled work surfaces, the joints in the area where the hob sits on
the surface must be completely filled with grout.
• On natural, artificial stone, or ceramic tops, the snap action springs
must be bonded in place.
• Ensure that the seal is correctly seated in the frame and that it is sea-
ted against the work surface without leaving any gaps. Additional
silicon sealant must not be applied, this will make removal more diffi-
cult in the event of the need for service.
• To remove the hob, it must be pressed out from below.
Electrical connection
• Connect the wiring harness plugs with the respective sockets of the
same colour of the built-in oven or switch box.
Installation Instructions
125