Brother MFC-P2000 Podręcznik szybkiej konfiguracji - Strona 40
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Wszystko w jednej drukarce Brother MFC-P2000. Brother MFC-P2000 43 stron. Laser printer / scanner / copier
Drukuj stronę
REGULATIONS
Federal Communications Commission Compliance
Notice (For USA Only)
Responsible party: Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911, USA
TEL: (908) 704-1700
declares, that the products
Product Name : Brother Laser Printer / Scanner / Copier
MFC-P2000, MC-P2000
Product Options: ALL
complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interface, and (2) this device must accept any interface received,
includung interface that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Important
A shielded interface cable should be used in order to ensure
compliance with the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user's authority to operate the
equipment.
FDA Regulations (For 110-120 V Model Only)
U.S. Food and Drug Administration (FDA) has implemented
regulations for laser products manufactured on and after
August 2, 1976. Compliance is mandatory for products
marketed in the United States. One of the following labels on
the back of the printer indicates compliance with the FDA
regulations and must be attached to laser products marketed
in the United States.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen,
CHINA
This product complies with FDA radiation performance standards,
21 CFR Subchapter J
MANUFACTURED:
BROTHER INDUSTRIES (USA) INC.
2950 Brother Blvd., Bartlett, TN 38133, U.S.A.
This product complies with FDA radiation performance standards,
21 CFR Subchapter J
MANUFACTURED:
BROTHER INDUSTRIES LTD.
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467 Japan
This product complies with FDA radiation performance
standards, 21 CFR Subchapter J
Industry Canada Compliance Statement (For
Canada Only)
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
International Energy Star Compliance Statement
The purpose of the International Energy Star Program is
to promote the development and popularization of
energy-efficient office equipments, which includes
computers, monitors, printers, facsimile receivers and
copy machines world-wide.
E
As an International
NERGY
Industries, Ltd. has decided that this product meets the
guideline of the program.
Laser Safety (For 110–120 V Model Only)
This machine is certified as a Class I laser product under
the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to
the Radiation Control for Health and Safety Act of 1968.
This means that the machine does not produce hazardous
laser radiation.
Since radiation emitted inside the machine is completely
confined within protective housings and external covers,
the laser beam cannot escape from the machine during
any phase of user operation.
Caution
Use of controls, adjustments or performance of
procedures other than those specified in this manual may
result in hazardous radiation exposure.
Radio Interference (220-240 V Model Only)
This machine complies with EN55022(CISPR
Publication 22)/Class B.
Before this product is used, ensure that you use a double-
shielded interface cable with twisted-pair conductors and
that it is marked "IEEE 1284 compliant". The cable must
not exceed 1.8 metres in length.
S
TAR partner, Brother