Brother mfc490w Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wszystko w jednej drukarce Brother mfc490w. Brother mfc490w 31 stron.

Drukuj stronę
2
Load plain A4 paper
a
Pull the paper tray completely out of the
machine.
b
Open the paper tray cover.
c
With both hands, gently press and slide the
paper side guides
guide
to fit the paper size.
b
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Check that the paper is flat in the tray.
Important
Do not push the paper in too far.
f
Gently adjust the paper side guides to the
paper with both hands.
2
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
g
Close the paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
3
Connect the power cord
and telephone line
b
Important
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
WARNING
The machine must be fitted with an earthed
plug.
b
WARNING
Since the machine is grounded through the
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.
Important
The telephone line cord MUST be connected
to the socket on the machine marked LINE.