Brother Work Smart MFC-J470dw Skrócona instrukcja obsługi - Strona 22
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wszystko w jednej drukarce Brother Work Smart MFC-J470dw. Brother Work Smart MFC-J470dw 35 stron. Printers
Również dla Brother Work Smart MFC-J470dw: Instrukcja obsługi Air Print (12 strony), Zaawansowana instrukcja obsługi (48 strony), Specyfikacje (2 strony), Skrócona instrukcja obsługi (35 strony), Podręcznik szybkiej konfiguracji (37 strony)
Drukuj stronę
For Wireless Network Users
Manual setup from the
17
control panel using the
Setup Wizard
Macintosh and mobile devices)
a
If you began the wireless setup from step 7 on
page 7, press a or b to choose Setup Wizard
and press OK.
Then go to c.
All other users go to b.
b
On your machine, press Menu.
Press a or b to choose Network. Press OK.
Press a or b to choose WLAN. Press OK.
Press a or b to choose Setup Wizard. Press
OK.
c
When Enable WLAN? is displayed, press OK
to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
d
The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, press a or b to
choose the SSID you wrote down in step 16-b
on page 19. Press OK.
If the wireless access point/router of the
selected SSID supports WPS, and the machine
asks to use WPS, go to e.
If the machine asks you to enter a Network
Key, go to f.
Otherwise, go to g.
NOTE
• If the list is blank, check that the wireless
access point/router has power and is
broadcasting the SSID. Move your machine
closer to the wireless access point/router and
try starting from b again.
• If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For more information, see the Software
and Network User's Guide.
22
e
®
(Windows
,
f
NOTE
g
NOTE
To install MFL-Pro Suite, continue to
step 18.
For Windows
Page 26
For Macintosh users:
Page 29
Press 1 (Yes) to connect your machine using
WPS. (If you choose 2 (No) to continue manual
configuration, go to f to enter a Network Key.)
When the LCD shows Start WPS, press the
WPS button on your wireless access
point/router, and then press 1 (Next) to
proceed. Go to g.
Enter the Network Key you wrote down in
step 16-b on page 19 using the dial pad to
choose each letter or number.
The letters appear in this order: lower case, upper
case and then numbers. To move the cursor left
or right, press d or c.
(For more information, see Entering Text for
Wireless Settings on page 32.)
Press OK when you have entered all the
characters, then press 1 (Yes) to apply your
settings.
Your machine will now try to connect to your
wireless network. It may take a few minutes.
Wireless setup is now complete.
For mobile device users:
• Connect your mobile device to a wireless
access point/router using Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows
mobile device's application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User's Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
http://solutions.brother.com/ and click Manuals
on your model's page.
• If you began the setup from step 7 on page 7,
go back to step 8 to continue the machine
settings.
®
users:
Now go to
Now go to
®
Phone) from your