AEG 6310 K Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob AEG 6310 K. AEG 6310 K 16 stron. Ceramic glass hob
Drukuj stronęThe electrical connection may only be
performed by a qualified electrician/
competent person. The electrical
connection must be carried out in
accordance with prevailing regulations
for appliances using heavy current.
The connection must comply with any
specific requirements specified by the
local electricity supply authority.
There must be no interference with
any of the unit's electrical parts.
The cable is mounted in the pegs as
shown.
Unscrew the cover while connecting
the cables.
A unit led directly to the power point
or the outlet rose.
More units may be connected via one
or more junction boxes.
The cable must be connected via an
external switch with a contact
separation of at least 3 mm in each
pole.
Please observe these instructions,
otherwise the warranty will not
cover any damage that may occur.
Single-phase zero-earth
Cable type 6 mm² HO5VV-F, twin and
earth.
The cable outside diameter must be
between 7,5 and 10,5 mm.
CHEC control
Autostop
If you forget to turn a cooking zone off
after use, it will be disconnected
automatically after a specific period of
time. The higher the setting, the shorter
the time before the zone is
disconnected.
Setting
AUTOSTOP
1
6 hours
2
6 hours
3
5 hours
4
5 hours
5
4 hours
6
1½ hours
7
1½ hours
8
1½ hours
9
1½ hours
When the autostop function is activated
the display will show:
The zones cannot be used. Turn all the
control buttons to 0.
The zones can now be used.
Automax
AUTOMAX supplies the zone with full
heat for a specific period, and then
adjusts down to the setting you have
chosen. When you turn on a zone
AUTOMAX starts automatically. The
display alternates between A and the
setting chosen. The period for which
AUTOMAX is connected depends on
the setting chosen. Please see the table
of settings.