AEG 6530 K Instrukcja instalacji i obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Hob AEG 6530 K. AEG 6530 K 35 stron. Built-in cooking surface

Operation of the cooking surface

If you select a higher setting when the automatic function is in opera-

tion, e.g. from § to %, the previous warm up time is taken into

account. If you select a lower setting, then the automatic warm up

function is brought to an immediate end. If you start cooking again on

a cooking zone that is still warm, the automatic warm up function uses

the residual heat. This saves time and energy.

Switching off a cooking zone

1.Select the desired cooking zone using the cooking zone buttons.

2. Press the + and - buttons simultaneously to switch off.

If you would like to switch on a cook zone again, which already has a

hot cooking utensil on it, you should always select the heat setting

using the - button. This way you avoid overcooking the food with the

automatic fast-boil function.

Cooking without the automatic warm up function

If you want to use the cooking zone in the same way as you are accus-

tomed, that is without the automatic warm up function, then select

the desired heat setting with the - button.

Select a high setting for warming up. As soon as steam starts to form or

the oil is hot, switch back to the setting necessary for further cooking.

1.Switch on the appliance and select the desired cooking zone using the

cooking zone selection buttons.

The decimal point in the associated display field illuminates.

2. Press the - button, to set the desired cooking setting ! to ).

The "Heat Setting/Residual Heat" display field for the corresponding

cooking zone indicates the current setting.

3. You can adjust the heat setting at any time using the + and - but-

tons, as long as the cooking zone is selected.

Switching off a cooking zone

1.Select the desired cooking zone using the cooking zone buttons.

2. Press the + and - buttons simultaneously to switch off.